Poly Aluminium Ferric Chloride
Poly Aluminium Ferric Chloride is a water-soluble substances, it
has good thermal stability and high solubility. In the drying
process will be 40%-50% solid content of poly-aluminum chloride
solution, the introduction of high-pressure pump, through pressure
entered the dryer in the nebulizer for atomization, scattered into
a tiny droplet, the droplet was obtained after drying granular
products that enable the completion of drying and granulating at
the same tine.
Poly aluminium ferric chloride pafc took a maximum value of zeta
potential at about pH 5.8 on the positive side. Compared with PAC,
Poly aluminium ferric chloride pafc gives better turbidity removal
performance in the range of pH from 7.0 to 8.4. Poly aluminium
ferric chloride pafc gives good color removal performance on
suspension dyes. Poly aluminium ferric chloride pafc also gives
good wastewater purifying results for the actual wastewater.
Therefore, Poly aluminium ferric chloride pafc is a high-effect and
stable water treatment agent.
Poly Aluminium Ferric Chloride characteristics:
1. Coagulates very effectively in low as well as high turbidity
2. Rapid and better floc formation as compared to Alum.
3. Less reduction of PH compared to Alum.
4. Very less sludge generation.
5. No requirement of other flocculation aids.
6. Reduced sedimentation time.
7. Effective in wide PH range.
8, Lower residual aluminium and other heavy metals as compared to
PAFC Chloride Usage:
1.The user can allocate remedy concentration by test and determine
the optimum dosage according to different to be added after they
are dissolved and diluted.
2.The dilution ratio of liquid product is 5-50% and the dilution
ratio of solid product is 2-20%.
3.The liquid product dosage is 3-40kg/1000 tons water and solid
product dosage is 1-15kg/1000 tons water.
4.The amount of specific dosing is based on coagulation tests and
PAFC ApplicationWastewater Treatment:
Top Grade PAC
Grade I PAC
Grade II PAC
Top Grade PAC
Grade I PAC
water insoluble% ≤
The effect of poly aluminium ferric chloride pafc on purification
and treatment for low temperature and low turbidity of the water is
particularly evident, it achieves incomparable result by not to add
alkaline assistant and other coagulants.Industrial waste water purification:
Poly aluminium ferric chloride pafc is widely used in various
industrial wastewater treatment processes including petrochemicals,
oil field, meat processing, leather, deer brewing, gourmet powder,
textile printing and dyeing industry and mining tailings.Mining:
Poly aluminium ferric chloride pafc is widely used as a flocculant
or filter aid in mining minerals such as gold, silver, copper,
aluminun, iron, tin, coal, lead and zinc.