After installation of this equipment, it is able to thorough solve
the deficiencies of single blades can not completely clean pressure
roller paint, which is simple operation, safe, reliable, clean and
Installation of scraper Blade:
Felt HoseThe standard materials of solvent brush are wool felt.
Felt Hose is a kind of equipment that it put the solvent or thin
agent (thinner) on the press roller to make the scraper blade easy
to remove the residual paint on the plate blade.
When replacing felt hose, the locking handle must be released and
lift up to pull out, pulling and taking out the felt hose.
Supply and Recycling of thin agent (thinner) Thin agent or solvent is sent to felt hose by pneumatic pump.
After received by excretion disk, the redundant thin agent and
solvent from plate blade of felt hose is recycled to thinner
melting device box through pipeline. The solvent is recycling.
Cylinder——In order to adjust the pressure which is applied to the pressure
roller, it adjusts the air pressure of cylinder, which make the
blade and the pressure roller contact closely and the thin agent
can be stored in the felt hose. Usually applied pressure is about
The operation of scraper bladeThe scraper blade is lifted up to
make it and pressure roller contact closely by turning the
adjustment handle. The size of scraper blade observes the paint of
pressure roller to judge in scene.
Above information for reference only.
1. Installation of the doctor blade
Material: ultra high molecular weight polyethylene
Scraper blade mounting height: about 24MM distance plate
If the knife-edge situation worse, we should be shaved with a
plane, or with sandpaper (# 400 or so) for grinding repair.
2. Felt hose:
Standard materials are wool felt solvent brush
Felt hose to the solvent or thinner agent (to satisfy the water) is
coated on the pressure roller, so that the first steel scraper
blade is easy to remove and clean the plate no residual paint
When replacing the felt with water, put the lock release lever and
pull it out after the lift to bring water to their blankets pulled
into the front and remove it.
3. Thin agent (satisfied water) supply and recycling
And paint thinner or solvent is pumped through a pneumatic hose to
the Ministry of blankets.
The felt hose portion excess agent and thin steel scraper plates
scraping disk receiving diluent is drained through the duct and
then recovered into the diluent container box, recycling the
By adjusting the air pressure cylinder to adjust pressure applied
to the pressure roller, so that blade into close contact with the
pressure roller, so that the diluent water can be stored in a felt
band. The pressure is generally applied to the left and right about
5. beater lifting operation
By pulling the valve manually switch allows the beater up / down,
please be careful to do this operation safety. Do not put your
hands or other metal objects placed in the upper part to avoid
6. scraper operation
By turning the adjustment handle makes intimate contact with the
blade lifted the pressure roller, squeegee pressure magnitude
observe whether the phenomenon of the pressure roller paint the
scene to determine.