YPAI-YPAIII ironing machine:
Ironing machine, Industrial ironing machine, Commercial ironing
machine, Automatic ironing machine, Ironing machine for bed sheets,
Flatwork ironer, Flatwork ironing machine, Roll ironing machine,
Industrial ironing machine for bed sheet, Marine ironing machine
1. Automatic ironing machine, horizontal structure, easy to operate
and high-quality ironing effect.
2. Steam or electrical heating.
3. Ironing for various of bed sheets, towel, tablecloth, curtain or
liens which are usually used in hotel, restaurant, school,
hospital, counterpane factory and laundry house, etc.
4. According to the fabric width, the roller length of industrial
ironing machine can be 1800mm, 2500mm, 2800mm and 3000mm, also we
can make the length less than 1800mm as per your requirements. And
the roller can be single, double and three. Surely, the ironing
speed of double rollers and three rollers ironing machine is
quicker than that of single roller ironing machine
5. The precise structure of double chests, springs and heating
proof felt ensure the rollers to keep enough electricity and spring
cushion, which creates the surface well-touched. Unique lever
balance pressure device and the cylinder pressure adjust system on
both sides. Unique whirl steam flow heating system for the
connecting plate improves the ironing result.
6. Reliable and safe operation system
With a finger guard, once operator touches the plate the machine
will stop immediately.
Anti-curliness device can prevent the fabrics curling in the
With steam and compressed air control system, once the pressure is
too low the system will alarm.
Many emergency stop button fixed on the ironer. Any buttoned
pressed, the ironer will stop to run.
The pneumatic system can raise and lock up the rollers to prevent
the fabrics and the proof felt damaged when the machine stops
running in case of no power.
A big touch screen controller with interactive interface on the
machine is easy for operator to program according to different
7. High efficiency and Low energy consumption
The chests have a large angle heating surface, which can improve
the heating efficiency.
The ironer adopts a single drive motor which can save energy. The
frequency converter system can adjust the ironing speed from 8~40
m/min with the change of temperature, type of fabrics, moisture,
The chests adopt a unique heating chamber recycle system with many
strips on double sides. Steam can flow in the chamber with high
efficiency. In addition, the chests are covered by thermal
insulators to reduce heat losses.
8. With CE and ISO9001 certificates.
|Ironing scope(mm)||‰¤ 1800‰¤ 3||‰¤ 2440‰¤ 3||‰¤ 2800‰¤ 3||‰¤ 2800‰¤ 3||‰¤ 3000‰¤ 3|
|Tumbler specifiation(mm)||Î¦ 8000— 1800||Î¦ 800— 2500||Î¦ 800— 2800||Î¦ 800— 2800||Î¦ 800— 3000|
|Ironing sreed of fabric(m/min)||0-7||0-7||0-7||0-20||0-20|
|Admission hole diameter(mm)||25||25||25||32||32|
|Overall dimension(mm)||2800— 1550— 1500||3500— 1550— 1500||3800— 1550— 1500||3850— 2500— 1500||4050— 2500— 1500|