The specifications of the pulp moulding production line are divers
due to the different customer preferences, market demands, labor
cost, energy cost, field availability, and the climate in different
areas. considering this, our company develop many pulp moulding
production line in different specifications to meet the customer's
The pulp moulding production line can produce egg tray (30-cell),
egg carton (6cell, 10 cell, 12cell, 6+6cell, 18cell etc.), fruit
tray (apple, pear,. tomato, etc.) , cup carrier ( 4pack, 2
pack),and some medical-care products and so on.
rotary egg tray forming machine Special explanation:
1.The pulp moulding product are made of waste paper, such as used
newspaper, waste cartons, cut-off in the paper making mills and
printing factories. the pulp board is smashed in the hydrapulper
and adjusted to a certain consistency, after being added some
chemicals, the fiber in the pulp will cover the wiremesh of the
mould with the effect of the vacuum, the wet blanks becomes
finished product after drying and hot pressing.
2.The main raw material is the wasted paper and can be collected
easily at low cost, the water in the production are all
recirculatedly used, there is no wasted water and gas exhausted
discharged during the production
The advantage of rotary egg tray forming machine is:
1.Cheap and very small.
2.Very fast with High output.
3.All you have to do is plug in and switch on .Put the waste paper
and water into hydro pulper the machine will work for you.There is
no need to install and debug.
4.It is control by PLC.The brand of PLC is Delta.Very famous
brand.Our machine was control by compute so it was high
automatic.Very easy operate.
5.We will give you Pulp pool and water pool which made by stainless
steel.So you don’t need to make Pulp Pool and Water pool.It will
save your time.