Sign In | Join Free | My enlightcorp.com
enlightcorp.com
Products
Search by Category
Home > Food Packaging >

Epoxy Resin Marine Spray Paint / Boat Bottom Paint With Half Glazed Luster

Categories Marine Spray Paint
Brand Name: Huisins
Model Number: 725-J53-10
Certification: ROHS/SGS/ISO
Place of Origin: China
MOQ: 500 KG
Price: negotiation
Payment Terms: T/T or L/C or D/P
Supply Ability: 2,0000MT per month
Delivery Time: 15 working days after received your payment
Packaging Details: 24.7KG/18L in 20L container
Main Raw Material: Epoxy resin
Standard film thickness: 50 microns dry ( 105 microns wet)
Application Method: Spray
Color: Multicolor
Type: Intermediate paint
Luster: Half Glazed
Theoretical spreading rate: 9.6㎡/L at typical film thickness
Solids (vol %): ≤450g/L
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    Epoxy Resin Marine Spray Paint / Boat Bottom Paint With Half Glazed Luster

    A One Park Tie Paint Marine Spray Paint Between Anticorrosives And Antifoulings​


    Product Description

    • A one park tie paint.
    • VOC is less than 450 g/L

    Intended Uses

    • Tie coat between anticorrosives and antifoulings
    • For use at maintenance and repair or maintenance.

    Product Information

    • Volume Solids 48%±3%
    • Finish/Sheen Seim-Gloss
    • Typical Film Thickness 75 microns dry ( 156 microns wet)
    • Theoretical Coverage : 9.6 ㎡/L at typical film thickness
    • Mix Ratio: one pack
    • Method of Application

    Airless Spray Tip size range 0.38-0.53mm

    Output Pressure ≥17MPa

    Air Spray Tip size range 2-3mm

    Output Pressure ≥0.4MPa


    Brush/Roller For small area only

    • Thinner : Not recommended .Use water only in exceptional circumstances(max 5% by volume)

    • Drying Information -5°C 5°C 25°C 35°C

    Touch Dry 2H 1H 30min 20min

    Hard Dry 48H 36H 24H 20H

    Pot Life Not applicable

    Overcoatings Data : Substrate Temperature

    Overcoated By -5°C 5°C 25°C 35°C

    Min Max Min Max Min Max Min Max

    725-J43-5 48H no 36H no 24H no 24H no

    • Storage :Store in cool and dry conditions, Well ventilate. Keep away from hot and fire.Store temperature should be higher than 0°C.

    Shelf Life: 12Months minimum at 25°C.Subject to re-inspection thereafter.


    • Pack Size : 24.7kg/18L in 18L container

    Surface Preparation:


    1. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning. All surfaces to be coated should be clean, dry and free from contamination.


    725-J53-10 should be always be applied over a recommended primer coating system.


    Observe the overcoating intervals specified for the primer (consult primer data sheet)


    Limitations


    • Apply in good weather, Temperature of the surface to be coated must be least 3°C above the dew point when the humidity is lower than 85%
    • The dry time and over coating interval may change according to the environment factors.
    • Forbid to trample or pullute the surface of 725-J53-10 and coat the next paint before the film is hard dry.

    Buy Epoxy Resin Marine Spray Paint / Boat Bottom Paint With Half Glazed Luster at wholesale prices
    Send your message to this supplier
     
    From:
    Enter your email please.
    To: Huisins New Material Technology Co., Limited
    Subject:
    Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0