Sign In | Join Free | My enlightcorp.com
enlightcorp.com
Products
Search by Category
Home > Flanges >

Hall Effect 3 Phase Induction Motor Controller , 15A Brushless DC Motor Driver

Categories 3 Phase BLDC Motor Driver
Brand Name: JUYI
Model Number: JYQD-V7.3E2
MOQ: 1 set
Delivery Time: 5-10 days
Place of Origin: China
Price: Negotiable
Packaging Details: PE bag+ carton
Payment Terms: T/T,L/C,Paypal
Supply Ability: 1000sets/day
Working voltage: 12-36VDC
Working current: 15A
PWM speed control: Duty cycle 0-100% (1-20KHZ)
Speed pulse signal output: YES
MODEL: JYQD-V7.3E2
ANALOG VOLTAGE SPEED REGULATION (V): 0 - 5V
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    Hall Effect 3 Phase Induction Motor Controller , 15A Brushless DC Motor Driver

    Hall effect BLDC motor driver JYQD-V7.3E2 ,12-36V DC,15A working current

    MODEL

    OPERATING TEMPERATURE(℃)

    OPERATING VOLTAGE(V)

    MAX CURRENT (A)

    · CONTINUOUS OPERATING CURRENT

    (A)

    PWM SPEED REGULATION

    (1-20KHZ)

    ANALOG VOLTAGE SPEED REGULATION (V)

    Speed pulse signal output

    JYQD-V7.3E2

    -20—85℃

    12V-36V

    16A

    15A

    Duty cycle

    0-100%

    0-5V

    Application guidelines
    1. Confirm that the voltage and power parameters of the motor not exceed the range as specified.
    2. Applicable to hall brushless dc motor with Hall at 120°, not all manufacturers' Hall line sequence are corresponding, you can adjust the Hall line sequence or motor three-phase line sequence according to the actual situation, to achieve the best driving effect.
    3. JYQD-V7.3E2 is driver board without housing and heatsink, it can drive the motor below 100 watt without any heatsink, but needs normal ventilation.
    4. The 5V output port on the drive board is forbidden to connect external power equipment. It is only applicable to external potentiometer or switch for speed adjustment, commutation and enabling operation
    Wiring diagram
    1. Control port
    5V —Driver board internal output voltage, external potentiometer or switch for speed adjustment and reversing operation
    Z/F —Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.
    VR —Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%
    EL —Enable port control. Connect 5V or no connect to allow operation, connect GND to forbid operation.
    Signal— Speed pulse signal output
    GND—Used for Driver board internal control
    2. Power port
    MA ----motor phase A
    MB ---- motor phase B
    MC---- motor phase C
    P- ----DC-
    P+----DC +
    3:Hall sensor port
    Ha--- Hall a
    Hb---Hall b
    Hc---Hall c
    GND---GND
    5V---5V output
    4. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.
    5. Control port distance: 2.54mm,Power port distance:3.96 mm
    6. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.
    Dimensional drawing
    DOWNLOAD JYQD-V7.3E2 USER MANUAL
    Buy Hall Effect 3 Phase Induction Motor Controller , 15A Brushless DC Motor Driver at wholesale prices
    Send your message to this supplier
     
    *From:
    *To: Shanghai Juyi Electronic Technology Development Co., Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0