International Standard MFR Plastic Testing Equipment Melt Flow
Index ISO1133 ASTM1238
Standards:
GB/T3682-2000,ISO1133-97, ASTM1238.
Descriptions:
1. Melt Flow Index Tester, Plastic Melt Flow Rate Test Instrument
used to measure the thermoplastic resin melt mass flow rate (MFR),
melt flow rate (MVR) volume and the density of the melt.
2. it is not only applicable to the high melting temperature of
polycarbonate, nylon, fluorine plastic, aromatic sulfones
engineering plastics,
3. also applies to polyethylene, polystyrene, polypropylene, ABS
resin, poly formaldehyde resin with lower melting temperature, such
as plastic test, widely used in plastic raw materials, products,
petroleum and chemical industries, and related colleges and
universities, scientific research units and the commodity
inspection department.
.
Exclusive feacures:
1. Fast heating speed, very small overshoot.
2. High precision of constant temperature.
3. Can accelerate recover to constant temperature condition after
padding.
4. Can use manual and automatic material trimming test method.5.
LCD display, equipment with built-in micro printer, test result can
be printed autocratically.
Etc...
Specification:
Machine size(W*H*D) | 250*510*350mm |
Power | AC220V±10% 50Hz |
Barrel parameters | Inner hole 9.55±0.025mm |
Pistons parameters | Piston head: 9.475±0.015mm |
Piston length | H=6.35±0.1mm |
Paramters | Extrusion hole 1=2.095±0.005mm |
Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade |
Temperature rangeradius | 400℃ |
Temperature accuracyblade to jawand dust collector | ±0.2 ℃ |
Display resolution | 0.1℃ |
Maximum comsuption | < 600W |
Temperature recovery time | less than 4 min. |
Weight parameters |
Weight accuracy | ±0.5% |
Basic configuration | 0.325kg, 1.2kg, 2.16kg, 3.8kg, 5.kg, 10.0kg, 12.kg, 21.6kg |
Position detection |
Loop distance from up and down | 30mm |
Control precision | ± 0.1mm |
Test flow control |
Times of cutting the material | 0~10 times |
Material cutting interval | 0~999s(set reference Table 2) |
Control flow reaches the set temperature without volatility |
Barrel temperature time | 15 min. |
Material be installed | 1 min |
Material sample temperature recovery time | 4 min. |
When binder set | 1min |
Detailed pictures of Melt Flow Index Tester:
Photo Show:
Temperature and load needed for different material of MFI:
Accessories:
Counterweight | 0.325kg,,1.2kg,2.16kg,3.8kg,5.0kg,10.0kg,12.5kg,21.6kg(in a load
within) |
counterweight tray | one set in a load within |
charging hopper | one set |
die cleaning load | one set |
loader bar | one set |
barrel cleaning load | one set , assemblies |
rod | one set (in a load within) |
Die | one set |
Gauze | two roll |
printer paper | two roll |
Our Service:
If you face any problems in future during testing process we
promise we will give you a reply within 48 hours and solution
provide within 3 working days. We can offer operation video and
English operation manual. We can provide video-con.
1. Considerate Service Different countries plugs, manually change
the-voltage from 110V to 380V, insurance indicator.
2. Excellent After sale Service:
12 months warranty. Besides, we can help you to repair your problem
controller freely, even it's not from our factory. What you need to
do is to send us the controller.
3. Commitment: We will sign a letter of commitment while we sign
the contract, which will improve your confidence to us.
4. Good Packaging: Simulation Animatronic Customer Triceratops are
covered with air bubble film before put them into the wooden case,
which not only has good shock absorption, impact resistance, heat
sealing and also has the advantages of nontoxic, odorless, moisture
corrosion, good transparency etc.