Control Cabinet Handle Control 3 Axis CNC Router Machine With
Offline DSP Connetion
This type CNC engraving machine is installed Control cabinet to
hold all drivers and switch, it's easy for maintain and repairing.
1. Material saving: The computer automatically optimizes the typesetting, and it is
easy to increase the utilization rate of the board;
2. Time saving: computer automatic typesetting, the efficiency is much higher than
manual calculation, saving typesetting time. The machine is
equipped with an automatic positioning cylinder, which does not
need to be repositioned after loading, saving time for feeding. The
vacuum adsorption table can fix small size plates (can absorb the
size of 1⁄2 A4 paper), ensuring that the plates are not displaced
during processing, no need to use fixtures to save the clamping
3. Shaped cutting: The cutting machine adopts the cutter cutting method to cut any
shape. At the same time, the automatic typesetting software can
also optimize the typesetting to make the shaped cutting faster and
4. Labor saving: The previous equipment for pushing the table saw and so on
requires two people to operate. The worker keeps turning the plate,
adjusts the ruler, and the work intensity is large. The machine can
operate multiple machines by one person, and the work intensity is
small, thus saving labor. cost;
5. Simple operation: The automatic typesetting software matched with the machine can
automatically optimize the typesetting by inputting the size of the
board, and generate the processing code. The average worker can
easily get on the job after 3-5 hours of training, reducing the
dependence of the enterprise on the skilled worker;
6. High quality of the blank: the plate cutting has no chipping phenomenon and the size is
accurate, which provides effective protection for the later
7. Improve the working environment of workers: The professional vacuum design can absorb 96% of the dust during
the process, which changes the working environment of the
traditional sliding table saw dust.
|Table Size||1300 mm * 2500 mm * 200 mm|
|Spindle||2.2 KW air cooling Spindle or 3.0 KW Spindle|
|Inverter||3.7 KW Delta Inverter|
|Rail||Hiwin 15 mm square rail|
|Table Type||T-slot Table with PVC layer|
|Body Structure||Steel pipe welded machine holder bed|
|X,Y Axis Transmission||Helical Gear And Rack Transmission|
|Z Axis Transmission||Taiwan Ball Screw Transmission|
|Control System||Syntec 6MB Control System|
|Motor And Driver||86BYGH450B Stepper motor and driver|
|Others||USB interface, Filter, tool sensor etc|
Square welded Pipe Body
Sqaure welded Pipe Body are made by 15 mm steel square tube and
beam, adopt welded with seamless welded structure. Annealing in
high temperature and vibrating stress relief. The body with big
weight, could keep good stability without deformation in long time
Inverter is controler of spindle, it control the start, speed and
stop of spindle. We usually adopt Taiwan Detla inverter.
Delta’s inverter combined with DC power systems, could provide a
modular UPS for AC power backup. The system can operate in economy
mode. When in normal opoeration the total installation’s energy
efficiency could be optimized automatically. In regions with AC
utility challenges, the auxiliary AC-powered infrastructure is
protected by the inverter system from AC mains fluctuations.
Further more, the inverter system offers new opportunities for
energy savings through providing backup AC power.
Syntec Control System
Syntec control system usually adopted in high end CNC router for
multi function. It could be used in ATC CNC router, single arm CNC
router, auto-loading & unloading CNC router, Oscillating knife
CNC router etc.
It is afforable, good with after-sales service, and is currently
the most complete domestic product line, the most potential for
development of professional PC based CNC controller brand.
The operation interface is designed according to human visual sense
system, which makes people's visual sense to reach the most
comfortable state. Portable hand-held remote control unit greatly
facilitates tool setting, test cutting, processing and security.
Leadshine stepper Motor and Driver 86BYGH450B
Leadshine stepper Moter and Driver is widely adopted in Chinese CNC
router, It’s cheaper and high accuracy. It won’t lose step in
working, speed performance increased about 30%, improve the
equipment speed heavily. Motor heat fell down 30%,prolong the life
time of the motor. Vibration phenomenon significantly reduced,motor
run more smoothly. Adopted the current control system
technology,save power consumption.
Ball secrew transmission
Ball secrew transmission is slow but more stabile transmission
type. Widely used in CNC router Z axis, and X, Y and Z axis for
mini cnc router. It could provide powerful guarantee of machine’s
accuracy and working life.
HQD spindle have water cooling and air cooling etc two cooling
types. Low price with high precision and effecienty. Four bearing
in our spindle motor could make sure same precision for over 3
years. Suitable for basic type and Ball Screw type cnc router. It
has ATC type too, could help you to carving complex pictures.