High Quality CNC Metal Turning Tool Blade Turning Tool Carbide
Tungsten Carbide Inserts Introduction:
High-hardness carbide inserts, suitable for Aluminum, copper, Titan
alloy, casting and wood.
Both turning and milling inserts.
Shining sharp, no buildups.
Good heat resistance, and wear resistance.
Suitable for cutting at higher temperatures.
Chemical stability, impact resistance.
10 pieces per box, clear packaging mark.
Clamping characteristics and requirements of indexable turning tool
A. The change of tool tip position should be within the allowable
range of workpiece accuracy when the positioning accuracy is high
and the blade is changed or a new blade is replaced.
B. The reliable clamping of blades should ensure that the contact
surfaces of blades, tool pads and tool rods are closely fitted and
can withstand impact and vibration, but the clamping force should
not be too large and the stress distribution should be uniform so
as to avoid crushing the blades.
C. Smooth chip removal blade in front of the best barrier-free, to
ensure the smooth chip discharge, and easy to observe.
D. Easy to use, easy to change blades and update blades. For small
size cutters, the structure should be compact. When meeting the
above requirements, the structure is simple and the manufacture and
use are convenient as far as possible.
(1) Turning tools can be divided according to their use.
(a) 90 degree turning tool (partial knife);
(b) 45 degree turning tool (elbow turning tool);
(c) Cutting knife;
(d) Boring cutters;
(e) Formed turning tools;
(f) Thread turning tools;
(g) Carbide non-grinding turning tools
(2) Basic uses of various turning tools
(a) 90 degree turning tool: used for turning the workpiece's outer
circle, step and end face.
(b) 45 degree turning tool: used for turning the workpiece's outer
circle, end face and chamfer.
(c) Cutting knife: used to cut the grooves cut out on the workpiece
(d) Boring cutter: used for turning the inner hole of the
(e) Forming turning tools: used for turning fillets, grooves or
workpieces with special shapes at the step.
(f) Thread turning tool: used for turning threads.
|1||YBC152||CVD coated P10–P20 carbide grade for finishing to medium operation
of steel and casting steel. Outstanding performance under higher
cutting speed and temperature with excellent wear resistance.||GC4315(SANDVIK), E6020(MITSUBISHI), T9125(TUNGALOY)|
|2||YB6315||CVD coating grade combining nano dioxygen gradient transition
techniques and crystal nucleus pre-insertion techniques.||GC4315(SANDVIK), T9115(TUNGALOY)|
|3||YBC252||CVD coated P20–P35 carbide grade for medium operation to roughing
of steel and casting steel. Optimal performance of wear resistance
and toughness for a wide application field.||GC4325(SANDVIK),E6020(MITSUBISHI),T9125(TUNGALOY)|
|5||YBD152||CVD coated K10–K25 carbide substrate. Optimized for medium to
roughing operation of cast iron. Good wear resistance and toughness
at higher cutting speed.||UC5115(MITSUBISHI)|
|6||YBD152C||Thick Al2O3 CVD coated K05–K25 carbide substrate. Optimized for
medium to roughing operation of cast iron.Higher wear resistance
and toughness at higher cutting speed in combination with TC chip
|7||YB7315||CVD coated K10–K25 carbide substrate. Optimized for medium to
roughing operation of cast iron. Improved wear resistance and
toughness at high cutting speed.||UC5115(MITSUBISHI), WAK20(WALTER)|
|8||YBM153||CVD coated M10–M25 carbide grade for fnishing to medium application
in stainless steel. High wear resistance and capability against
plasctic deformation at higher cutting speed.|
|9||YBM253||CVD coated M15–M35 carbide grade for medium to roughing operation
in stainless steel with wide application field. High wear
resistance and capability against plasctic deformation at higher
|10||YBG202||PVD coated M10–M25/P10–P30 carbide substrate for finishing to
medium application of stainless steel and steel (milling). Good
wear resistance in a wide application field.|| |
|11||YBG205||PVD multilayer coated M20–M40/S15–S25/P10–P30 carbide substrate for
finishing to medium application of stainless steel, super alloy and
steel (milling). Good wear resistance and thermal stability in a
wide application field.||VP15TF(MITSUBISHI)|
|12||YB9320||PVD multilayer coated M10–M25/P10–P30 carbide substrate for
finishing to medium application of stainless steel, super alloy and
steel (grooving/milling).Optimized coating stability for higher
wear resistance and thermal stability in a wide application field.|| |
|13||YNT251||Uncoated P10–P25 cermet grade for fine finishing to medium
operation of steel and stainless steel. Good wear resistance and
toughness. Suitable also in light interrupted cut.|| |
|...||...||DON'T HESITATE TO CONTACT US TO GET MORE DETAILS!||...|
YG3X 14.6-15.2 1320 92 is suitable for high speed finishing of small
cutting sections of cast iron, non-ferrous metal and alloy quenched
steel alloy steel.
YG6A 14.6-15.0 1370 91.5 is suitable for semi-finishing of hard cast
iron, non-ferrous metals and their alloys, as well as
semi-finishing and finishing of high manganese steel, quenched
steel and alloy steel.
The production and application of
YG6X 14.6-15.0 1420 91 show that the alloy has good effect in
processing cold-hard alloy cast iron and heat-resistant alloy
steel, and is also suitable for surface treatment of ordinary cast
YG6 14.5-14.9 1380 89 is suitable for medium cutting speed
semi-finishing of cast iron, non-ferrous metal and alloy
YG6X-1 14.6-15.0 1500 90 is suitable for continuous cutting,
semi-precision turning, small section precision turning, rough
turning thread, continuous section semi-precision milling, hole
roughing and precision milling of cast iron, non-ferrous metal and
its alloy non-metallic materials.
YG8N 14.5-14.8 2000 90 is suitable for high speed cutting of cast iron,
white cast iron, nodular cast iron, chromium, nickel stainless
steel and other alloy materials.
YG8 14.5-14.9 1600 89.5 is suitable for rough turning, roughing,
grinding, drilling and reaming of general and deep holes in the
processing of cast iron, non-ferrous metals, their alloys and
YS2T 14.4-14.6 2200 91.5 belongs to superfine grain alloy. It is
suitable for milling low-speed rough turning, heat-resistant alloy
and titanium alloy. It is used as cutting tool, tap and saw blade
YT15 11.0-11.7 1150 91 is suitable for rough turning, semi-finishing
turning and finishing turning in continuous cutting, small
cross-section finishing turning in intermittent cutting,
semi-finishing turning and finishing turning on continuous surface,
rough and precise expanding of holes in processing of carbon steel
and alloy steel.
YT5 12.5-13.2 1430 89.5 is suitable for rough turning, rough shaving,
semi-fine shaving, rough grinding and drilling of discontinuous
surfaces of carbon and alloy steels (including steel forgings,
stamping parts and casting surfaces).
YS25 12.8-13.2 2000 91 is suitable for rough turning, milling and
planing of carbon steel, cast steel, high manganese steel, high
strength steel and alloy steel.
YT14 11.2-12.0 1270 90.5 is suitable for rough turning, rough turning
and continuous cutting in the processing of carbon steel and alloy
steel, semi-finish turning and precision turning in intermittent
cutting, continuous rough turning, drilling and rough expansion of
YW1 12.6-13.5 1180 91.5 is suitable for the processing of refractory
steel, high manganese steel, stainless steel, common steel and cast
YW2 12.4-13.5 1350 90.5 is suitable for finishing and semi-finishing
of heat-resistant steel, high manganese steel, stainless steel and
high alloy steel. Processing of common steel and cast iron.
YS30 12.45 1800 91.0 belongs to superfine grain alloy. It is suitable
for efficient milling of various steel, especially alloy ste