6063 Wood Finish Aluminium Profiles Heat Transfer Wood Grain Profiles

6063 Wood Finish Aluminium Profiles Heat Transfer Wood Grain Profiles

Aluminum Profiles Features:

Wood grain transfer profile refers to the transfer of the wood grain pattern on the printing paper or transfer film by heating and pressurizing on the basis of powder spraying or electrophoretic coating, according to the principle of high temperature sublimation heat penetration Penetrate into the profile that has been sprayed or electrophoresed. The wood grain profile produced has clear texture and strong three-dimensional effect, and can better reflect the natural feeling of wood grain. It is an ideal energy-saving and environmentally friendly material to replace traditional wood.

Wood grain has strong adhesion to aluminum, non-toxic, odorless and easy to clean. The product lines are clear and lifelike, the three-dimensional effect is strong, the appearance decoration effect is good, and the visual effect of returning to nature and returning to nature. The coating film on the surface of the sprayed aluminum profile is non-volatile and non-oxidized in the air and does not pollute the environment. The dirt deposited on the sprayed surface can be restored to its original luster and appearance once it is cleaned.

Process 1: Suitable for large area or special-shaped substrate
Suitable for large area or special-shaped substrate
The first step: select the substrate that has been sprayed or electrophoresed
Step 2: Wrap the substrate to be transferred with wood grain heat transfer paper, and fix the paper interface with high temperature resistant adhesive paper to prevent the wood grain heat transfer paper from loosening. (Note: The front side of the wood grain heat transfer paper should be pasted to the surface of the substrate to be transferred.)
Step 3: Put a high-temperature resistant and well-sealed tubular plastic plastic bag on the substrate that has been wrapped by wood-grain heat transfer paper, and then draw a vacuum from both ends of the plastic plastic bag until the plastic plastic bag can Adhere to the substrate fully and effectively.
The negative pressure of the vacuum should be adjusted appropriately according to the characteristics of the substrate to be transferred and the negative pressure that the plastic plastic bag can withstand, usually between 0.3 and 0.8Mpa. (Note: The purpose of using plastic bags is to force the wood grain thermal transfer paper to fully and effectively adhere to the substrate through negative pressure.)
Step 4: Send the wrapped substrate to the oven for baking. The baking temperature and time should be based on the characteristics of the substrate to be transferred, the depth of the texture to be transferred, and the specific performance of the oven. Make appropriate adjustments, usually the transfer temperature is 160～180℃, and the time is 5～8 minutes
Step 5: Take out the transferred substrate from the oven, pull off the plastic plastic bag from one end of the transferred substrate (note: this plastic plastic bag can be reused), tear off the heat transfer paper, Do surface cleaning

Process 2: Suitable for flat substrate
Suitable for flat substrates
The first step: select the substrate that has been sprayed or electrophoresed
Step 2: Lay the front side of the wood grain heat transfer paper opposite to the front side of the substrate to be transferred
The third step: press and heat the flat heat transfer machine, usually the temperature of the transfer is 160～180℃, and the time is 18～25 seconds
Step 4: Tear off the heat transfer paper and transfer with PET heat transfer film

Process 3: Suitable for special-shaped substrates
The first step: select the substrate that has been sprayed or electrophoresed
The second step: Wrap the transferred substrate with PET heat transfer film, and seal the PET heat transfer film into a tubular bag with an ultrasonic sealing machine. (Note: The front side of the PET heat transfer film should be attached to the surface of the substrate to be transferred.)
The third step: Vacuum from both ends of the tubular PET heat transfer film bag until the PET heat transfer film can fully and effectively adhere to the substrate. The negative pressure of the vacuum should be adjusted appropriately according to the characteristics of the substrate to be transferred and the negative pressure that the PET heat transfer film can withstand, usually between 0.3 and 0.8Mpa
Step 4: Send the wrapped substrate to an oven for baking. The baking temperature and time should be based on the characteristics of the substrate to be transferred, the depth of the texture to be transferred, and the specific performance of the oven. Make appropriate adjustments, usually the transfer temperature is 160～180℃, and the time is 5～8 minutes
Step 5: Take out the transferred substrate from the oven, and remove the PET thermal transfer film by manual or mechanical blowing (that is, blow the PET thermal transfer film tubular bag by blowing).

Specification of Profile:

Wood Grain Aluminum Profiles:

Wood grain coloring is a process of applying a wood grain effect onto aluminum profiles. This beautiful finish has all of the distinctiveness of wood and gives the customer all the aesthetic benefits of real timber with none of the maintenance costs.

Advantages

Realistic, high-definition appearance
Affords new design elements and adds value to projects
Durable finish protects humidity and UV rays
Eco-friendly processes, saves on waste while averting harsh pollutants

Process
YONGLONG Aluminum uses the sublimation process to create wood grain finish on aluminum extrusion profiles. This process is a physical-chemical process, which is the direct transition of a substance the solid phase to the gas phase. The aluminum profile must be in powder coated or electrophoresis treatment firstly. Cover the aluminum with wood grain paper or heat transfer printing film/paper, then put it into the oven for 170-200℃ backing. Remove the film when time is up. Then you will get a bright wood grain color.Wood Finish Aluminium Profiles

Applications

Wood grain finish aluminum profiles offers a nature timber appealing, environmentally friendly solution for many products in architectural building construction and home interior industry, such as windows and doors, curtain wall and facade, louvers, railing, decking, furniture, ceiling and cladding, house siding, garden fence and gate, cabinets, appliance, etc. The wood grain finish is ideally suited for applications where architects prefer to see a natural wood appearance.Wood Finish Aluminium Profiles

Corporate Introduction:

Corporate Overview:

Guangdong Yong long Aluminum Co., Ltd. is located in the No. 10 (Sanjiang market) of Leping Town, Sanshui District, Foshan. The company was founded in 1997. It is a comprehensive and large-scale aluminum profile enterprise integrating the research and development, production and sales of aluminum alloy profiles. The company is leading the "Hong Ying" brand. Strong comprehensive strength and excellent service make Yong long "Hong Ying" sell well all over the country and exported to Southeast Asia, Europe, South America and many other countries.Wood Finish Aluminium Profiles

Our company has 900 employees, including 120 high and intermediate engineering technology and management personnel, with advanced and perfect design, production, testing and testing methods as well as perfect sales network and after-sales service system. The products sell well in more than 10 national and foreign ports, Australia and Taiwan areas.Wood Finish Aluminium Profiles

Corporate Advantages:

1.20 years' experience and advanced equipment

2.Customize: We can manufacture according to your size and shape of such aluminum profile;

3.Strong production capacity - 28 extrusion lines, 50,000TONS/Year

4.One Stop Service Specialized in mould, extrusion, anodizing, powder coating, wood grain and Processing;

5.Shortest Delivery , competitive prices and excellent service

Corporate Culture:

The company insisted: "unity and progress, pioneering and innovative, high quality of this, service to win" business purposes, the new full cooperation with customers, Gongtuo career, create a better future.

When you work with us, you can expect top-quality resources and parts, excellent customer service, and to be treated like family. We’re invested in this industry and our clients. When you work with us, you can tell the difference!

Photos:

Please tell us the information below, and we will give the best suggestion to you!

1. Where you intend to use the aluminium profiles?
2. If you have the estrusion drawing, send us and we develop the correspondence mold.
3. Which color you want or tell us the architectural style you like.
4. Purchase quantity. It will convenient us to give you the best price.

Corporate Overview:
Guangdong yong long aluminum Co.,LTD. is located in Shanshui District, Foshan City, Leping Group on the 10th, the company was founded in 1997, is set aluminum profile research and development, production and sales as one of the integrated large-scale aluminum enterprises, "Hong surplus" brand. Strong comprehensive strength and quality of service, so that Wing Lung "Hong Ying" selling all over the world, exports to East Asia, South America, South Africa, the United Kingdom, Dominican,Russia and other countries.

Corporate Certification:
After years of development, the company passed the ISO9001: 2000 quality system certification, the international standard product certification. Yonglong Aluminum has won the "Guangdong Province Famous Brand", "Guangdong Province Famous Brand", "ISO14001 Environmental Management System Certification", "OHSMS18001 Occupational Health and Safety Management System Certification", "Adopting International Standard Products" Is "," China's quality products "and other certificates. Companies adhere to the scientific concept of development, by strengthening the comprehensive management and increase innovation, and continuously enhance the energy-saving emission reduction enterprises to accelerate into the environment-friendly modern enterprise list.

Corporate Culture and Philosophy:
The company insisted: "unity and progress, pioneering and innovative, high quality of this, service to win" business purposes, the new full cooperation with customers, Gongtuo career, create a better future.
 

We have participated in exhibitions all over the world in order to expand the market, made a lot of customers and friends, quality and price guarantee, orders continue to flow

When you work with us, you can expect top-quality resources and parts, excellent customer service, and to be treated like family. We’re invested in this industry and our clients. When you work with us, you can tell the difference!

We welcome customers from all around the world!
We provide the best price and best service!