Categories | Other |
---|---|
Brand Name: | DEA |
Model Number: | BML-10 |
Certification: | ISO9001 |
Place of Origin: | CHINA |
MOQ: | Negotiation |
Price: | Negotiation |
Payment Terms: | T/T |
Supply Ability: | 10 Sets per Month |
Delivery Time: | 6 - 8 weeks |
Packaging Details: | Packed in wooden case |
NAME: | Wiped Thin Film Evaporator |
Material: | Stainless Steel |
Voltage: | 220v |
Power(W): | 3.5KW |
Speed: | 80-390rpm |
Weight: | 100KG |
Warranty: | 12 Month |
DEA-BML-10 Stainless Steel 316 Lab Wiped Thin Film Evaporator(TFE/WFE) Equivalent to 50L Rotary Evaporator
Wiped Thin Film Evaporator Introduction
Wiped Thin Film Evaporator Application
It is widely used before molecular distiller to remove ethanol for hemp crude oil.
Falling film evaporator is with ethanol removal rate below 90%, wiped film evaportor is with ethanol removal rate above 98%.
Wiped Thin Film Evaporator Parameters
MODEL | BML-10 Wiped Thin Film Evaporator |
MATERIAL | stainless steel 316 |
TEMPERATURE | Room temp~260 ℃(Electric heating included) |
DIAMETER | 100 (mm) |
HEAT EXCHANGER HTA | 0.12 (m2) |
FEED AMOUNT | 2000~5000 (ml/h) |
ROTATION SPEED | 80-390rpm |
FILM SYSTEM | Self-Clean Roll Filming System |
VACUITY | 0.5mbar(depend on the nature of material and vacuum pump)(vacuum pump not included) |
FLOOR AREA | length*width*height=1100*500*1750 (mm)(without pump) |
POWER | 3.5KW (without pump) |
VOLTAGE | 220V (we offer voltage transformer) |
WARRANTY | 12 Month |
TFE Details
——Design
Thin film evaporators are horizontal evaporator with wiper basket,
gear motors and external condenser.
The vapour nozzle is typically arranged at the upper end of the
evaporator in order to facilitate the transfer of the vapours to
the external condenser.
Dea offers thin film evaporators from 0.058 to 3 m2 .
——Operation
Feed liquid is admitted into still under high vacuum, immediately
spread into a very thin film and forced quickly down the
evaporation surface. Heated walls and high vacuum drive the more
volatile components (distillate) to the external condenser as the
less volatile components (residue) continue down the cylinder. The
resulting fractions, thus separated, exit through individual
discharge outlets. Depending on application, the desired product is
either the distillate or the residue fraction. Small amounts of
condensable low MW compounds collect in cold trap upstream of
vacuum system. For high solvent loads, an optional external
condenser may be installed immediately downstream of the still.
——Particular features
Continuous distillation process.
Low operating pressures (100~10000Pa ,100Pa=1mbar).
Short residence time.
High evaporation rates.
Processing of high-boiling, high-viscosity or crystallizing
products is possible.
Can be used as a reboiler for column.
Low fouling on evaporator wall.
Shanghai Dea chemical equipment Co.,Ltd
——We devote to design and develop the equipment of chemical
separation and abstraction.
——We came from East China University of Science and Technology,
which we long-term cooperated with later. And now, we serve for
many famous universities, such as Tsinghua University , Sun Yat-sen
University , etc.
——We provide equipment of distillation and extraction for the
technicians in the area of chemical , medicine and food industry.
——We own senior engineers who have rich experience in chemical
engineering.
——Our products can be used in lab-scale, pilot-scale experiments
and small-scale production.
——The experimental results are more authentic by using our products
thanks to the continuous operation during the course of the
experiments or pilot-scale experiments.
——We repaire imputed equipments out-of-warranty for UIC,POPE,BUCHI
in the past few years, which made us accumulating rich experience.