Integrated 10/100 Base T Ethernet Lan RJ 45 Connector JKM-0009NL LPJ0011BBNL

JKM-0009NL LPJ0011BBNL Single Port RJ45 Modular Jack with 10/100 Base-T Integrated Magnetics

Key Features of JKM-0009NL RJ45 Jack:

• 1X1 Tab-Down RJ45 LPJ0011ABNL 10/100Mbps Fast Ethernet

• Transformer RJ45 8P8C pin Integrated Magnetics Connector

• Cross Equivalent JKM-0009NL Pin to Pin Replace Cost-Effective

• Designed for industrial-rated applications, Meets IEEE802.3 specification

• 350μH minimum OCL with 8mA DC bias current

• Temperature ranges from 0℃ TO 70℃

Specifications of RJ45 Through Hole Connector:

LPJ0011BBNL RJ45 Connector Datasheet:

LPJ0011BBNL.pdf

Material Specification of 10/100Base-T RJ45 Magnetics:

Shield Material: Brass

Shield Finish: 20-40m inches Nickel over 10-20 mils Brass
Contact Material: Phosphor Bronze
Contact Plating Area: Nickel underplating and selective gold plating 15µ inches
Contact Solder Area: Tin matte finish
Housing Material: Thermoplastic
Housing Specification: UL 94 V-0
MSL Rating: 1

JKM-0009NL Pulse Jack Rj45 Testing Rating:

1. Mating Force (MAX): 5lbs./2.268kgs.
2. Unmating Force (MAX): 5Ibs./2.268kgs.
3. Durability: 750 Insertions
4. Plug to Jack Retention (MIN): 20Ibs./9.075kgs.

Application Notes:

1. Layering ground planes is advisable. If possible, route connector/discrete module ground pins to chassis/analog ground.
2. Using BST (75Ω resistors and high voltage cap to chassis ground) to terminate Cable side CTs is advisable for the best EMI performance (included in most connector solutions).
3. Keep signal traces from PHY to connector/discrete module as short as possible. If traces exceed 3-4 inches, pay close attention to line impedance imbalance.
4. Follow the PHY manufacturer’s application notes for further layout.

LINK-PP is a professional designer and Manufacturer of magnetic telecom and networking components. Founded in Shenzhen in 1997 and began to develop Discrete Transformer. With over 26 years of experience in innovation and technology leadership. Our main products include RJ45 Connectors, LAN Transformers, and SFP Modules. We focus on improving product reliability and durability.

Main Production Lines

◆ 10/100/1000/10GBase-T LAN Isolation Transformer and Filter

◆ Rj45 Modular Jack With Integrated 10/100/1000/10G Magnetics
◆ Magnetic Rj45 Jack with POE/ POE+; IEEE823.3af/ IEEE802.3at
◆ LAN Transformer With POE/ POE+; IEEE823.3af/ IEEE802.3at
◆ T1/E1,T3/DS3/E3/STS-1 Interface LAN transformer
◆ ISDN,HDSL,ADSL and VDSL Transformer and splitter

◆ Optical Transceivers