USB Powered Desktop RFID Reader Multiple Protocols 380 * 290 * 21mm

Product Introduction:

TPAD10M is a multi-protocols desktop RFID reader which supports ISO15693, ISO18000-3mode3
and ISO14443A/B protocols. Also, it is an integrated reader with antenna together, which is also
metal shielding design to support working normally in metal surrounding environment. Because of its
metal package edge design, its misreading is cut down to less than 1cm.

Its wear-resisting surface makes it durable and ni even using for long time. USB communication
interface is convenient to link with computer to control and this interface also supports the power
to run the reader. There is a power switch at the short side of the reader, when not using, you
could turn off the reader easily.

Product Features:

• Support multi-protocols:ISO15693, ISO 14443A/V, ISO 18000-3M3 and NFC
• Support tags:

  NFC Forum Type 1: Innovision Topaz512
  NFC Forum Type 2: Mifare Ultralight, Mifare Ultralight C, Mifare Ultralight EV1, NTAG21x.
  NFC Forum Type 3: Sony Felica [only support Polling]
  NFC Forum Type 4: Mifare DESFire EV1
  NFC Forum Type 5: ICODE SLI ,ICODE SLIX ,ICODE SLIX2 ,Tag-it HF-I plus
  Mifare Classic Type: Mifare S50, Mifare S70 ,Mifare Mini
  ISO18000-3M3 Type: ICODE ILT
  ST ISO14443B Type: SRIX4K, SRI512, ST25TB512-AC

• Reading range is different according to different protocols
• Integrated design with reader and antenna
• Metal shielding design to work normally even it is plad on the metal desktop
• Support host and scan work mode (Setup through software)
• Be capable of automatically turning off RF when at task idle

Product Application:

RFID library management, RFID archive management, RFID jewelry management, RFID
drug administration, RFID shop settlement, Self Service Kiosk, etc.