50 mm PU Insulation Double Skin Modular Fresh Air Handling Unit With Heat Recovery Wheel

EK keeps looking for valuable distributors and partners around international markets…

50 mm PU insulation double skin modular fresh air handling units with heat recovery wheel

EKDM air flow range is from 1000m3/h to 400000m3/h. Available functional sections include fresh/return air mixing section, cooling section, heating section, primary/medium/high efficiency filter section, electric heating section, humidifying section, sound attenuation section, heat recovery section, secondary air-return section, fan section, air diffuser section etc. Different combinations can meet different air handling requirements.

• The surface of the unit is made of quality color steel, which can resist corrosion, scratch and ultraviolet radiation.

• Internal panels are made of steel plates galvanized with aluminum and zinc, with an assured service life of more than 15 years. All panels feature end-to-end joints and smooth surfaces, without any bur or corroded point.

• The internal panels feature reinforced design, which is strong enough to support the largest air handling unit.

• The unit panel has two thicknesses, namely 30mm and 50mm.Inside the panel, hermetically foamed polyurethane (no fluorine) with a density of 48kg/m3 is used as the heat- insulating material. The heat conductivity factor is less than 0.02W/m°C.

• Each functional section of the unit is equipped with a steel trough base, thus ensuring it is well supported, easy to transport and assemble. The overall robustness of the unit meets the standard of CEN2.

Heat Recovery Section

The wheel heat recovery is molded using customized alveolate metal template and coated with special desiccant adsorbing material. In typical installations, the wheel is fixed in the middle of the pipe and divided into two half-moons, pumping stagnant indoor air out of one half-moon, and fresh air into the other. Meanwhile, the wheel revolves slowly (approximately 20RPM) to transfer sensible/latent heat from one half-moon to the other through its metal plates and desiccant absorbing material (heat liberation), condensing vapor from high-humidity side and releasing vapor into low-humidity side by evaporation and heat absorption.

Specifciations

Note:
■ This table only lists some typical models among many models for quick model selection.
■ Total fan pressures listed above are tested on standard fans with rated air flow.
■ External residual pressure = Total fan pressure - Internal resistance. For internal resistance of EKDM units.

EUROKLIMAT (EK) was established in 1963 in Italy. For the past half a century, it has become famous as an energy-saving air-conditioning manufacturer in Italy and globally. Continuous innovation, new product development and top manufacturing quality are the driving force behind this growth.

EUROKLIMAT (EK) pursues the ideals of protecting the environment, providing physical comfort and adopting energy-saving into the whole process of product R&D, manufacturing and service. Our products covering residential, commercial and close control air-conditioner are manufactured according to the global generally accepted standards.