Sign In | Join Free | My enlightcorp.com |
|
Categories | Copper Module |
---|---|
Brand Name: | NUFIBER |
Model Number: | SFP-GE-T |
Certification: | CE FCC Rohs |
Place of Origin: | China |
MOQ: | 1 piece |
Payment Terms: | L/C, T/T, Western Union,Credit Card |
Supply Ability: | 10,000 pcs per month |
Delivery Time: | Within 1-3 work days |
Packaging Details: | 10pcs/plastic bag, 500pcs/carton |
Data Rate: | 1.25Gb/s |
Distance: | 100m |
Connector: | Rj45 |
DDM: | Support |
Power Supply: | 3.3V |
Working Temperature: | 0~70℃ |
Compatibility: | Cisco, HP, Huawei, Finisar... |
Manufacturer: | Yes |
10/100/1000Mbps Copper RJ45 UTP Cat5 cable Module 100meters
10/100/1000 copper SFP transceiver is high performance, cost effective module compliant with the Gigabit Ethernet and 10/100/1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 10/100/1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable.
The GLC-T10/100/1000 supports 10/100/1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair.
The GLC-T10/100/1000 provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2-wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2-wire serial bus at address ACh.
Features
Applications
Optical Parameters
Parameter | Symbol | Min. | Typical | Max. | Units | Notes/Conditions |
Supply Current | Is | 320 | 375 | mA | 1.2W max power over full range of voltage and temperature. See caution note below | |
Input Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | Referenced to GND |
Surge Current | Isurge | 30 | mA | Hot plug above steady state current. See caution note |
Parameter | Symbol | Min. | Max. | Units | Notes/Conditions |
SFP Output LOW | VOL | 0 | 0.5 | V | 4.7k to 10k pull-up to host_Vcc. |
SFP Output HIGH | VOH | host_Vcc -0.5 | host_Vcc + 0.3 | V | 4.7k to 10k pull-up to host_Vcc. |
SFP Input LOW | VIL | 0 | 0.8 | V | 4.7k to 10k pull-up to Vcc. |
SFP Input HIGH | 2 | Vcc + 0.3 V | V | 4.7k to 10k pull-up to Vcc. |
Transmission Line-SFP | ||||||
Parameter | Symbol | Min. | Typical | Max. | Units | Notes/Conditions |
Line Frequency | fL | 125 | MHz | 5-level encoding, per IEEE 802.3 | ||
Tx Output Impedance | Zout,TX | 100 | Ohm | Differential | ||
Rx Input Impedance | Zin,RX | 100 | Ohm | Differential |
Products Show
Factory Show
![]() |