Lonsdor KH100+ Highlights:
1. Modern appearance design, in line with the operating habits of
the public.
2. Device system comes with operation instructions, easier for you
to use.
3. It covers almost all the functions of the similar products in
the market.
4. Built-in super sensor to collect data(over-range data
collection).
5. Exclusive support for 8A(H chip) generation.
6. Built-in WIFI module, can connect to network at any time
7. 4-pack remotes & smart key involved
8. Handy chip holder integrated, 902MHZ supported
9. For Toyota 8A Smart Key Direct copy to Add key (Latest Update)
Identify/Copy/Generate Chip:
Multi-vendor chips supported
Especially for Toyota 8A(H) chip Our predominance
Simulate Chip:
Able to simulate 4D/46/48 chips
With built-in super sensory data collector(no interference within 1
meter when collecting data)
Generate Remote/Smart key:
Dedicated connector to generate remote/smart key Online update
supported
Remote generation diagram
Smart Key Generation Diagram
Dedicated Connector to Generate Remote Key:PS2-7Pin OD3.5
Access Control/Remote Frequency
One-click identify and copy IC/ID cards
Copy multi-vendor chops
Detect remote frequency bands with high accuracy
One click identify ID card,able to copy multi-vendor chps,at the
back sensor area
Detect Super Frequency
Detect multiple frequency brands with high accuracy
Identify Coil:
1) Search smart induction area Connect remote key with remote
connector, Put KH100+'s antenna close to the pre-determined
position. If inductive signal is identified, the device will
continuously make sounds, please check if the position is right(as
shown below).
2) Detect IMMO Connect remote key with remote connector, Put
KH100+'s antenna close to key identification coil, and use key to
turn ignition ON. When KH100+ buzzer beeps, it means signal is
detected.
Remote Frequency
Enter this menu, put remote control at the device’s induction area
to detect remote frequency.
Lonsdor KH100+ Special Function:
Include: detect infrared signal, unlock for Toyota smart key, More
functions, to be continued...
1. Detect Infrared Signal
Put remote control at the infrared signal detection area, press the
remote's button once. When the light on KH100's screen is on, it
indicates there is infrared signal, otherwise there is no signal
(see below pic).
2. FT Smart Key
For Toyota or Lexus smart keys from Lonsdor, you can perform the
following functional operations: read version info, modify key
value, unlock and upgrade program and etc. Put in the smart key,
click [select] to operate.
3. Unlock for Toyota Smart Key/Detect for Toyota Key Status
Put in the smart key, click OK to operate.
4. Charge Key
For a chargeable key with battery, you can perform this function.
Put in the key, click [OK] to operate.
Lonsdor KH100+ Registration Guide:
Note: After booting the device, please connect to WIFI and enter
the following process.
New User
1) For the first use, please prepare a common call phone or email
to help complete activation process, click OK to start.
2) Boot the device and enter registration activation process.
3) Input user name, password. Confirm password, cell phone number
or email to obtain verification code. Then input the code to submit
registration.
4) Account registered successfully, it will take 5 seconds to bind
the device.
5) Successful registration, enter the system.
Registered User (who has registered Lonsdor products before)
1) For the first use, please prepare a registered call phone or
email to help complete activation process, click OK to start.
2) Boot the device and enter registration activation process.
3) Input your registered mobile number or email, password to obtain
verification code. Then input the code to submit login.
4) Account login succeeded, it will take 5 seconds to bind the
device.
5) Successful registration, enter the system.
In addition, users who have already registered Lonsdor's product
can directly choose [registered user] to activate account.
How to update Lonsdor KH100+:
Enter settings menu
Connect the device to network
Then choose [check for updates]
One-click for online update!
| Name | Notes |
| Antenna | To induce simulated chip and detect ignition coil |
| Display screen | 2.8-inch color screen, resolution: 320X480 |
| Induction coil | To identify, copy, generate key chip or remote, etc. |
| Port 1 | USB-B port |
| Port 2 | Dedicated port for remote’s connector |
| Power button | In shut-down state, tap to boot the device. In power-on state, tap
to switch to power saving mode. Long press for 3s to shut down |
| Remote frequency detection | Put remote in this position to detect its frequency. |
| High-frequency detection | To identify and copy IC card.
|
Lonsdor KH100+ Function List:
Identify Copy
Chip Simulation
Remote Generation
Remote Frequency
Access Control Key
Chip Generation
Coil Identification
Special Function
Packing List
1pc x Lonsdor KH100+ Hand-Held Remote Key Programmer
1pc x USB cable
3pcs x remote programming cables
1pc x manual
1pc x product certificate card
OBDSTAR X300 Classic G3 Cluster Calibration + Airbag Reset + ECU Flasher + Test Platform Paid Software Activation Service
