SS304 Wedge Wire Rotary Screen Drum Filter For Wastewater Treatment
Attribute | Value |
---|
Name | Wedge Wire Rotary Screen Drum Filter |
Material | Stainless steel 304 |
Diameter | 750mm |
Length | 1100mm |
Slot | 0.15mm |
Wire | 1.5*2mm Vee wire |
Support rod | 2*3mm Vee wire |
Ends | Flange |
Technique | Point welding |
Features | Non-clogging |
Application | Filteration |
Package | Wooden box |
Business type | Manufacturer |
Filter type | From inside to outside |
Stainless Steel Wedge Wire Rotary Screen Drum Filter
Wedge Wire Rotary Screen Drum Filter, also called wedge wire
cylinder, is a type of cylindrical "V" shape wedge wire screen,
which is made of stainless steel V shaped wires and support rods.
As the wedge wire rotary drum screen is working under high pressure
when separation and filtration, so there is reinforced rods on the
structure.
The end of rotary drum wire screen is welded flanges or welded
rings for easy installation. The slot sizes and structures may
varies according to different materials and working conditions.
Wedge Wire Rotary Screen Drum Filter Information
Name:
Wedge Wire Rotary Screen Drum Filter ,Wedge wire Screen, Johnson
screen, Water wire screen, Water well screen, Wire warp screen,
Screen tube, Wound screen, Continuous slot screen filter, Sand
control screen, Wedge wire screen pipe.
Material:
Stainless steel 201, 304, 316L, 904L, Duplex steel 2205, 2507, C276
etc.
Diameter:
From 25-1300mm
Slot:
From 0.025-100mm
Length:
From 100-6000mm
Wrap wire:
1×2mm, 1.2×2mm, 1.2×2.3mm, 1.5×2mm, 1.5×2.5mm, 2×3mm, 2×3.5mm,
2.2×3.5mm, 3×4.6mm etc.
Support rod:
2×3mm, 3×4.6mm Vee shaped; Also can be round wire, ø3.0-ø6.0mm
Ends:
Welded rings/Plain beveled ends, Male/female threaded, Flange,
Closed up etc.
Use:
Water Well, Waste Water Treatment, Water supply systems, Coal &
Mine, Food Processors & Beverage Screens, Environmental protection,
Refining & Petrochemical, Architecture & Construction etc.
Wedge Wire Rotary Screen Drum Filter Type
Flow inside to outside also known as filtration in to out (FITO)
happens when the support profile is horizontal to the surface
profile of the wedge wire filter.
Flow inside to outside is ideal if you want to maintain the
pressure of the fluid during the filtration. However, there will be
frequent cake formation as a result of the deposit of contaminants
at the sides of the wedge wire filter. This is due to the small
inner diameter which does not generate enough pressure to force the
contaminants.