3V 5V 1X1 1x2 1x4 2X2 Fiber Optic Switch Mechanical MM Type 850nm
![]() |
...in- coming optical signal into a selected output fiber. This is achieved by using a patent pending opto-mechanical configuration activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has...
Shenzhen Jiangfan Communication Equipment Co., Ltd.
|
UPC Polish SMF Non Latching Full 2x2 Fiber Optical Switches
![]() |
...2x2 Optical Switches Iis through and Cross optical state. Its used in Channel Blocking, Configuration add/drop solution with low optical distortions and high reliability. The optical path through the units is purely optical; i.e. there is no optical to electrical to optical conversion. There is no electrical loss or electrical bandwidth limit on the fiber optic path. The optical path will redirecting an incoming optical......
Shenzhen linkopto Technology Co. Ltd
|
FC APC 1x3T 1620nm Latching Optical Switch Device
![]() |
... wavelength, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for Optical Network, Protection, Transmitter and Receiver Protection,Network Test System and...
Gezhi Photonics (Shenzhen) Technology Co., Ltd.
|
Non Latching 2x2 Bypass Fiber Optical Switch 1310/1550nm For Add Drop
![]() |
...2x2 Bypass Optical Switch Non-Latching 1310/1550nm for Optical Add/Drop 2x2 Mechanical Optical Switch is used to turn on, turn off and switch optical signal. The 2x2 Mechanical Optical Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical network in near future. Features Applications Unmatched Low Cost Optical...
Shenzhen Unifiber Technology Co.,Ltd
|
Non Latching 500MW 1550nm 2x2 Bypass Fiber Optic Switch
![]() |
...Latching 1550nm 2x2B Fiber Optic Switch bypass with board PCB Board Hilink 2x2 Fiber Optic bypass switch module packing in a Metal case available for high operating temperature. Its comes with 1310&1550nm singlemode Non-Latching type SC/APC pigtailed. 2x2 Bypass Fiberoptic Switch connects optical channels by redirecting an incoming optical......
Shenzhen HiLink Technology Co.,Ltd.
|
2x2 Bypass Mechanical Fiber Optic Switch 1310 / 1550nm Latching OXC system
![]() |
2x2 Bypass Mechanical Fiber Optic Switch 1310 / 1550nm Latching OXC system GEZHI Phothonics 2x2 Bypass Mechanical Fiber Optic Switch (2X2B Optical Switch) connects optical channels by redirecting an incoming optical signal into a selected output fiber. All GEZHI Photonics’ 2x2 Bypass Mechanical Fiber Optic Switch (2X2B Optical Switch) support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching...
Gezhi Photonics Co.,Ltd
|
2X2 Optic Switch Latching Single Mode 1260-1650nm
![]() |
2X2 Optic Switch Latching Single Mode 1260-1650nm Optic SwitchFeatures: 1. Low insertion loss 2. Wide wavelength range 3. Low crosstalk 4. High stability and reliability 5. Epoxy-free optical path 6. Latching and non-latching Optic SwitchApplication: 1.R&D......
HTD Fibercom Co., Limited
|
Optical switch, 2x2, bypass type, 5V operating voltage, 1260~1620, latching type, FC/PC connector.
![]() |
... an ideal Component for OADM, OXC, system monitoring and error protection. It could be easy to integrate into a high-density optical communication system. Features Structure: 4 ports Insertion loss : ≤ 0.8dB Control type: latching type High return loss:...
David fiber device Ltd
|
DUAL 1X2 Non-Latching Optical Fiber Switch 3.3V Single Mode
![]() |
... 1290~1330 and/or 1525~1610 850 or 850&1310 1x1, 1x2, Dual 1x2 dB ≤ 0.8 2x2B ≤ 0.9 Insertion Loss1,2 2x2 ≤ 1.0 Dual 2x2B ≤ 1.0 Dual 2x2 ≤ 1.2 Return Loss1, 2 dB ≥ 45 ≥ 30 Polarization Dependent Loss dB ≤ 0...
Wuhan ETERN Optoelectronics Technology Co.,Ltd.
|
1x1 Switch 5V DWDM MUX DEMUX Mechanical Optical Switch Non Latching
![]() |
...tems for multiplexing and routing different channels of light into or out of a single mode fiber (SMF). This is a type of optical node, which is generally used for the formation and the construction of optical telecommunications networks. "Add" and "drop"...
Shenzhen UT-King Technology Co., Ltd.
|