UL486A-B Cable Testing Equipment Conductor Damage Test Device HC9903B Two Stations
|
UL486A-B Cable Testing Equipment Conductor damage test device HC9903B Two Stations Standard of Cable Testing Equipment: UL486A-B Clause 9.3.2(Standard content attached to the document) Purpose of Cable Testing Equipment: To test whether threaded terminals......
Guangzhou HongCe Equipment Co., Ltd.
|
GB3048 General Conductor Resistance Test Device High Accuracy Kingpo
|
GB3048 General Conductor Resistance Test Device Product information: This device is the special appliance used for measuring the conductor resistance. It is applicable not only for the electrical wire whose length is 1 meter, but also the length of ......
KingPo Technology Development Limited
|
IEC 60884-2022 VDE Type Plug And Socket Conductor Damage Test Equipment
|
... Conductor Damage Test Equipment Product Information For Conductor Damage Degree Test Equipment: Standards: IEC 60884-1: 2022 Section 12.2.5 (Figure 11), IEC 60669-1: 2017 Sections 12.2.5 and 12.3.10 (Figure 9), UL486A-B, etc. Application: This device is ......
Sinuo Testing Equipment Co. , Limited
|
Digital Display Optical Cable Repeated Bending Test Device With Separated Structure
|
...cable repeated bending test device is used to detect optical fiber cables to withstand repeated bending capability, which meets the test requirements to optical cable of method E6. Adopt reciprocating motion structure, completely eliminate the possibility of emergence lock, swing arms are smooth and low noise. Non-contact sensor detects repetitive bending times that avoid abrasions to devices......
Advanced Instruments Co.,Limited
|
Single Cable Vertical Burning Test Device
|
...Cable Vertical Burning Test Device Standard: IEC 60950-1,BS EN 60950-1,BS 7002, UL746A,IEC60947.1, IEC730.1. Application:Suitable for vertical burning test of single cable or optical cable products, determine the combustion characteristics of insulating materials. Test sample:Single cable or optical cable......
shanghai kerang technology co ltd
|
Wire And Cable Heat Release Test Device
|
... of vertical flame spread, heat release and smoke production of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. EN 50399 details the apparatus and the arrangement and calibration of the instrumentation to be...
SKYLINE INSTRUMENTS CO.,LTD
|
Multi Conductor Cable 90° Bending Testing Cable Flex Cycle Test Machine
|
...Conductor Cable 90° Bending Testing Cable Flex Cycle Test Machine Model:C5092 Purpose: Cable bending test machine is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable......
Infinity Machine International Inc.
|
AC220V 50Hz IEC Test Equipment For Checking Wire Conductors Damage
|
... test apparatus for checking damage degree of wire which confirms to many standards such as IEC60884-1 clause 12.3.10 figure 11, IEC60669 and so on. This compliance is used for judging whether the design and the ......
Dongguan Kingpo Technology Limited
|
Checking Conductors Damage IEC60884 Fig11 Test Apparatus
|
....3.10 figure 11, IEC60669 and so on. This compliance is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requirement of non over-damage to the wire. Besides...
Guangzhou Shice Equipment Co., Ltd.
|
Hot Sales High-Frequency Spark Tester For Cable 15KV Spark Testing Machinery
|
...Cable 15KV Spark Testing Machinery Application Apply to detect the defective insulation of various wires and cables Speficiation 1,Power:AC220V 2,Max. detection voltage:15KV 3,Electrode length:600mm Feature 1,The instant sparks won't damage the good insulation of the wire conductor......
DONGGUAN WIREMAC MACHINERY EQPT. CO., LTD.
|
Submit your “cable conductor damage testing device” inquiry in a minute :