7006-47C For G5 Lampholders , 7006-60C For G13 Lampholders
|
...) G13 lampholders Conform to IEC60061-3-7006-60C (The end of the gauge has an M6 thread that can be connected to the push-pull gauger) Lampholders for a fluorescent lamp, with a test-cap in position, are subjected, for 1 min, to a pressure applied to the...
KingPo Technology Development Limited
|
PLC G5/G13 Lampholders Axial Force Test Device Clause 4.4.4 For Fluorescent Lamps
|
IEC60598-1 Clause 4.4.4 G5/G13 Lampholders Axial Force Test Device for Fluorescent Lamps 1. Introduction The axial force test device is designed to test the lampholders (G5, G13, G23, G10q, GR8) for fluorescent lamps according to IEC60598-1 clause 4.4......
Pego Electronics (Yi Chun) Company Limited
|
IEC 60061-3: 2007 G13 Double Ended Lamp Holder Go Gauge Measuring Gauges
|
...G13 Double Ended Lamp Holder Go Gauge Measuring Gauges Product Information For G13 Double Ended Lamp Holder: The G13 Double-ended Lamp Holder Go Gauge is conforming to IEC 60061-3-2007, 7006-60C-3 Ⅰ and Ⅱ. To check a combined pair of flexible or inflexible lampholders G13 with regard to entry of lamp pins. It shall be possible to insert each gauge into a combined pair of lampholders......
Sinuo Testing Equipment Co. , Limited
|
E14 7006-25-7 Lamp Cap Gauge , Screw Lamp Holder Gauges
|
...Lampholders Gauge Screw Lamp Holder Gauges 7006-25-7 IEC60061-3 E14 lampholder gauge list 7006-25-7 Go Gauges for screw threads of lampholders E10 E14 E40 7006-26-4 NOT GO gauges for screw threads of lampholders E10, EP10, EY10, E14, E27, E39 and E40 7006-30-2 Plug gauge for E14 lampholder for testing contact making 7006-31-5 Gauge for testing contact-making and protection against accidental contact during insertion of lamp in lampholders......
Guangzhou Shice Equipment Co., Ltd.
|
Lampholder Test Gauges IEC60061 3 IEC60238 IEC60399 Reference Standard
|
..., IEC60399 Model Number Gauge Name 7006-25-7 “GO” GAUGE FOR SCREW THREADS OF LAMPHOLDERS E10, E14 AND E40 7006-26-4 “NOT GO” GAUGES FOR SCREW THREADS OF LAMPHOLDERS E10,EP10,EY10,E14,E27,E39 AND E40 7006-30-2 PLUG GAUGE FOR E14 LAMPHOLDER FOR...
Dongguan Kingpo Technology Limited
|
IEC60061-3: 7006-12A-2 B22d Supplementary Go Gauges for Lampholders
|
...the rerstricted use of these gauges, See "PURPOSE" below. Edge slightly chamfered (see sheet 7006-1) PURPOSE: The gauge shall be used solely to check interchangeability with respect to the corresponding caps B22d and BY22d on finished lamps respectively,...
HK LEE HING INDUSTRY CO., LIMITED
|
IP20 G13 Fluorescent Lamp Holder 60Hz Double Led Fluorescent Light
|
G13 Lamp holder Iron Base LED Tube Bracket for Double Fluorescent Tube Lights Key Words of LED Tube Bracket: * Power: 2x2FT / 2x4FT / 2x5FT LED tubes * Operating Voltage: AC100-277V/50-60Hz * Fully wired with VDE certified wires, terminal block, G13 lampholders; * Replicable: T8/G13......
Zhongshan zuoling Lighting Co., Ltd
|
14*1W /14*2W Bean pot light | G-DL-BP-14/28W
|
14W/28W LED bean pot downlight, high lumen output, adopt Cree, Taiwan High power LED chips, dimmable from 3%-100%, compatiable with Leading edge dimmers, trailing edge dimmers and universal dimmers.Product Parameters: Rated Wattage: 14/28W Lampholder: ......
GOIN LED LIGHTING LIMITED
|
Submit your “g13 lampholders 7006 60c” inquiry in a minute :