AOI Tester for Gold wire testing, chip testing, sensor testing, dual gauge design approach
|
... Foreign Objects,Loss ofAluminum, Overlapping Solder Joints, Damaged Protective Coating,BrokenSolder Joints, Loss of Gold in Gold Fingers, Large Flat Balls,Unsoldered← Wires, soldering wrong wires, missing soldering wires, broken wires, wires stepping,...
Dongguan MENTO Intelligent Technology Co., Ltd.
|
Wires And Cables Pull Tester Wire KICK Yank Tester Cone Pull Testing Machine
|
... Testing The Wire Pull Tester, also known as the Cable KICK Pull Yank Detector, is a high-performance testing machine designed for precise and efficient measurement of wire elongation. This state-of-the-art instrument is essential for quality control in...
Infinity Machine International Inc.
|
Enameled Wire Breakdown Voltage Tester With IEC60851 Standard
|
...Wire Breakdown Voltage Tester (Hot State Voltage Tester) IEC60851 Standards compliant: Compliant with GB/T4074.5, IEC60851 "Test method for winding wire - Part 5: Electrical properties (breakdown voltage)", GB/T4279.11 "Verification method for enameled winding wire test equipment - Breakdown voltage tester" test standard requirement. Test......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Glow wire test apparatus, glow wire tester without test chamber , IEC 60695-2-10 Glow Wire Tester ,
|
...Wire Tester , glow wire tester without test chamber , IEC 60695-2-10 Glow Wire Tester Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A .It makes required material(＞77%Ni/20±1%Cr) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test......
KingPo Technology Development Limited
|
High Precision Wire Testing Equipment ZY6014E Single Wire Cable Level Combustion Tester
|
... plate. Lighted torch, the flame to the longitudinal axis of the sample with 90 ° angle. Meet the standard: The single cable level combustion tester is made according to GB12666.3 test method of wire and cable combustion test, NCB standard no.610/1974,...
Dongguan HOOHA Electrical Equipment Company Limited
|
60 R/Min Wire Testing Equipments
|
...Wire Tester Using Electricity Heating Regulation Material Wire Testing Equipments Product Description: 1. Glow wire tester Accord with IEC60695-2-10, UL 746A, GB/T5169.10, GB4706.1 2. Glow wire tester Using electricity heating regulation material (Ni80 / Cr20) of resistance wire (Φ 4 mm Ni-Cr alloy wire) to 0°C~ 1000°C in 1 min, then with 1.0 N vertically burn it 30s,measure the fire risk by product light-off or hold burning time ,also test...
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
UL1581-1990 Cable Testing Equipment / Wire Cable Spark Tester
|
Wire Cable Spark Tester , Electrical Wire Spark Tester Product information: Wire Cable Spark Tester complies with the standard requirement of UL1581-1990. It is indispensable test equipment for testing the quality of insulating layer with high voltage during the productive process of electric wire and cable. These series of testers......
Guangzhou HongCe Equipment Co., Ltd.
|
400M / Min Line Speed Wire Testing Equipment Spark Tester AC 220V 0-15 Kv
|
... of the insulating layer of the necessary test equipment.The sparks are manufactured according to the following two standards: 1, in line with GB3048 "wire and cable insulated wire core frequency sparks Test method "requirements, sensitivity <600μA 2,...
Guangzhou Kinte Electric Industrial Co.,Ltd
|
IEC60695 Flammability Glow Wire Test Apparatus 0.5m3 Studio Volume
|
...Using electricity heating regulation material (Ni80 / Cr20) of resistance wire (Φ 4 mm Ni-Cr alloy wire) to 0°C~ 1000°C in 1 min, then with 1.0 N vertically burn it 30s,measure the fire risk by product light-off or hold burning time, also test light-off...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Auto Counting AC220V 50Hz Electric Wire Swing Durability Tester
|
...Wire Swing Durability Tester, Cable Swing Test Machine , Wire Life Testing Apparatus Electric Wires Buckling Resistance Tester is used to test the buckling resistance of electric wires. The method is to fix one end of specimen and load on other end to swing the wire with certain times. The cable bending tester is used for testing bending resistance of outgoing line of power plug and wires. Fix the wires......
Guangdong Aisry Instrument Technology Co., Ltd.
|
Submit your “gold wire testing aoi tester” inquiry in a minute :