Conventional Heat Detector For Fire Alarm Fire Detection System For Building Fire Protection and Prevention in Buildings
|
Conventional Heat Detector For Fire Alarm Fire Detection System In Building Introduction This Heat detector consists of the following key components: Sensing Element: The sensing element is the core component that detects changes in temperature. It can use either a fixed temperature or a rate-of-rise principle to detect heat. Fixed temperature detectors activate the alarm......
Shenzhen Xinhe'an Technology Co., Ltd.
|
2 Wired 4 Wired Fire Alarm Heat Detector Temperature Fire Alarm Infrared Type
|
...Conventional Heat Detector Temperature Fire Alarm Features 1. Smart adopted, high stability 2. Low standby current 3. Anti-RFI & Anti-EMI 4. 9~35VDC wide voltage 5. Duel LED for 360 visual 6. Flashing LED power indicator Technical Data: Type 2 wires 4 wires Voltage DC 9V~35V Standby current ≤55uA Alarm current ≤55mA@DC24V ≤25mA@DC24V Alarm indication Red LED Flash Reset Power Off Temperature -10℃ +50℃ Humidity ≤95 RH Alarm......
Mantern Industrial Co., Ltd.
|
Electric 24V 2 wire conventional fire alarm systems heat detector sensor
|
...conventional fire alarm systems heat detector sensor They work perfectly with all conventional fire control panels Dual LEDs for 360-degree visibility Advanced MCU Expert Algorithm Software. Easy installation and maintenance Durable sensor head, no need for replacement SMD circuit board design-satisfactory quality and reliability guaranteed System Voltage (nominal): 24 VDC (9V~ 28VDC) Standby Current: 40 μA @ 24VDC Alarm...
Jingo International CO., LTD
|
Conventional fire alarm 2 wire DC24V systems heat detector sensors
|
Conventional fire alarm 2 wire DC24V systems heat detector sensors They work perfectly with all conventional fire control panels Dual LEDs for 360-degree visibility Advanced MCU Expert Algorithm Software. Easy installation and maintenance Durable sensor head, no need for replacement SMD circuit board design-satisfactory quality and reliability guaranteed System Voltage (nominal): 24 VDC (9V~ 28VDC) Standby Current: 40 μA @ 24VDC Alarm......
Shenzhen KINGUI Limited
|
Conventional Fire Alarm Reflective gst Infrared Beam Smoke Detector
|
...Detectors must be supporting the use of reflectors , but requires the use of a reflector or four different decisions based on the distance between the two installed . Detector has the following characteristics : ( 1 ) The transmitter , receiver into one,...
Yiwu Yidun E-commerce Firm
|
Security System 2 4 Zone Home Security Conventional Fire Alarm Control Panel Intelligent
|
...conventional fire alarm system control panel Product features The working principle of fire alarm fire alarm system mainly relies on the collaborative work between fire detectors, alarm controllers and linkage devices. First, fire detectors continuously monitor physical parameters in the environment, such as smoke concentration, temperature, and the presence of flames. These detectors......
Guangzhou Xinlin Fire Fighting Equipment Co., Ltd.
|
LPC-16CE Intelligent Particle Detector
|
LPC-16CE Intelligent Particle Detector FEATURES & BENEFITS Meet the 2020 edition of the "Chinese Pharmacopoeia" and can directly detect the size and number of insoluble particles of injections, sterile powders and drug packaging materials (......
Beijing HiYi Technology Co., Ltd
|
Wired conventional fire alarm system with 8 zones
|
...conventional fire alarm system with 8 zones 8 zones wired fire alarm system for conventional Model:JS-FAS02 Conventional Fire Alarm 1.4 zones, 8 zones, 16 zones for choice; 2.2 Sound Output Conventional Fire Alarm Control panel: 3.4( 8 or 16) Style B (Class B) Initiating Device Circuits (IDCs). 4. All zones accept two-wire smoke detectors......
JSUS ELECTRONIC TECHNOLOGY CO.,LIMITED
|
Conventional Fire Alarm Control Panel , 4 Zones Multi-Line Fire Alarm Control Panel
|
4 zones multi-line alarm host, each channel can connect 25 detectors, intuitive one-to-one status display, one way sound and light alarm output, one way fire alarm, fault, monitoring alarm output...
Shenzhen Smart Trading Co., Ltd.
|
Conventional fire alarm control panel with 1/2/4 zones
|
security fire alarm control panel NW800 fire alarm control panel 1/2/4 zones specification: 1.microproccesor controlled,battery and energy interruption alarm,led display 2.zone, power, alarm, fault led indicators;manual alarm, siren and reset buttons,......
JSUS ELECTRONIC TECHNOLOGY CO.,LIMITED
|
Submit your “heat detector conventional fire alarm system” inquiry in a minute :