IEC 60335-1 Clause 14 Impulse Test Generator Max. 12.5kV Transient Over Voltage Testing
|
IEC 60335-1 Clause 14 Impulse Test Generator Max. 12.5kV Transient Over Voltage Testing Product Information: Standard: Conform to IEC 60335-1 clause 14, etc. Application: It is used to detect the transient over voltage of the components and the electrical clearance and the creepage distance. Test......
Sinuo Testing Equipment Co. , Limited
|
Impulse voltage test generator with monitor ，IEC 60335-1-Clause 14 Impulse test generator
|
Impulse voltage test generator and monitor ,IEC 60335-1-Clause 14 Impulse test generator 1. Test pulse waveform: 1.2/ 50uS 2.The waveform error is ±20%; 3.The output pulse voltage is 0 ~ 10kV, which can be adjusted continuously； 4.The accuracy of voltage ......
KingPo Technology Development Limited
|
IEC 61851 High Voltage Impulse Test Generator for EV Charging Equipment
|
IEC 61851 High Voltage Impulse Test Generator for EV Charging Equipment Complied Standards & Clauses The Impulse Test Generator conforms to the standard requirements of IEC 61851-1 clause 12.7, IEC 61851-23 clause 11.4, etc. Equipments Overview It is used to verify that the appliances shall withstand the transient over-voltages to which they may be subjected. The impulse voltage test is a destructive test in which a breakdown occurs if the test...
Sinuo Testing Equipment Co. , Limited
|
IEC60335-1 Clause 14 High Voltage Impulse Generator With Wave Shape 1,2/50 µS
|
...Clause 14 High Voltage Impulse Generator With Wave Shape 1,2/50 µs IEC60335-1 Clause 14 Transient overvoltages Appliances shall withstand the transient over-voltages to which they may be subjected. Compliance is checked by subjecting each clearance having a value less than those specified in Table 16 to an impulse voltage test. The impulse test voltage has a no-load wave shape corresponding to the 1,2/50 µs standard impulse......
Guangzhou HongCe Equipment Co., Ltd.
|
1.2/50us Impulse Voltage Generator For Impulse Dielectric Withstand Test For EVCS
|
...Impulse Voltage Generator for Impulse Dielectric Withstand Test for EVCS 1. Introduction The impulse voltage generator has a no-load wave shape corresponding to the 1.2/50ms standard impulse specified in IEC 61180 clause 7.1.2.1. The output impedance of the impluse generator is 500Ω and 2Ω, and test voltage can up to 15KV. It can meet the test requirements of IEC60664-1 clause 6.2.2.1 and IEC61851-1 clause......
Pego Electronics (Yi Chun) Company Limited
|
IEC 60335-1 Household Appliance Test Equipment Power Cord Flexing Test Apparatus
|
... 23.3 and 25.14, figure 8. Application: It is used to check the power cord flexing (bending) resistance performance of the small household appliances (such as Coffee pot / ......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Stainless Steel IEC 60335 Test Finger Probe 18 Ф8.6
|
IEC 61032 Figure 12 Test Probe 18 Small Finger Probe Ф8.6 This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children......
Guangzhou Shice Equipment Co., Ltd.
|
IPX3 - IPX4 Oscillating Tube Test Chamber
|
...testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC 60065 clause15.4.1 and figure 11, IEC 60335-1 clause 22.3, IEC 60884-1 clause 14.23.2. The balancing arm of the test apparatus pivots about a horizontal axis through the center lines of the contact tubes of the socket-outlet at a distance of 8 mm behind the engagement face of the socket-outlet. Test...
HK LEE HING INDUSTRY CO., LIMITED
|
Submit your “iec 60335 1 clause 14 impulse test generator” inquiry in a minute :