IEC 60598-1 Clause 4.14.1 Test E Spring Clamp Luminaires Test Device For Luminaires Test
|
IEC 60598-1 Clause 4.14.1 Test E Spring Clamp Luminaires Test Device For Luminaires Test Product information: Standard: IEC60598-1:2020 "Luminaries-Part1: General requirements and tests" clause 4.14.1 test E Specimen and limitations: Spring clamp mounted luminaires Test purpose: Used to test the clamping strength of spring clamp-mounted luminaires to verify the safety of the clamping connection Test principle: In this test......
Sinuo Testing Equipment Co. , Limited
|
Clip Mounted Luminaires Test Device IEC60598-1 Clause 4.14.1 10mm Thickness
|
... for the pull force test of clip-mounted luminaires. Test requirements: 1). A pull is applied on the cable without jerk for 1 min in the most unfavourable direction in normal use. During the test the clip is mounted on standard test "shelves" made of...
Pego Electronics (Yi Chun) Company Limited
|
IEC 60598 1 Light Testing Equipment
|
...-1 clause 4.14.3. The adjustment device, equipped with the appropriate cable or cord shall be operated in accordance with following table. A cycle of operation is a movement from one extreme of the range to the other and back to the starting ......
Dongguan Kingpo Technology Limited
|
IEC 60598-1 Light Testing Machine Tumbling Barrel Tester With 3 mm Steel
|
IEC 60884-1 Plug Socket Tester Tumbling Barrel Tester With 3 Mm Steel Product Introduction This tester conforms to the standard requirement of IEC60598-1. It is used to check the drop resistance of electrical accessories. The falling times can be preset......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60598-1 clause 9.2 expanded metal spacer , Tests for ingress of moisture
|
IEC 60598-1 clause 9.2 expanded metal spacer , Tests for ingress of moisture Conform to IEC 60598-1 clause 9.2 Where connection is made by a plug or a similar device, then this shall be regarded as part of the complete luminaire and shall be included in the tests and similarly for any separate controlgear. For tests of 9.2.3 to 9.2.11, a fixed luminaire intended for mounting with its body in contact with a surface shall be tested......
KingPo Technology Development Limited
|
Luminaires Testing Equipment IEC 60598-2-21 Binding Appratus For Rope Light
|
...Testing Equipment IEC 60598-2-21 Binding Appratus For Rope Light IEC 60598-2-21 21.7 Binding Apparatus for Rope Light Overview of equipment: The lamp twine rope winding test device is made to meet the test requirements of Chapter 6.14 of IEC 60598-2-20: 2002 and GB7000.9-2008 standards and the requirements of Figure 3. This device......
SKYLINE INSTRUMENTS CO.,LTD
|
High Accuracy Light Testing Equipment IEC 60598 1 Lamp Caps Test Sample
|
Test Gauges for Lamp Caps and Holders HDJ0001 Standard: IEC 60598-1: Luminaires - Part 1:General requirements and tests; IEC 60061-3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges Application: These gauges are for the control of interchangeability and safety of lamp caps and holders. Test......
shanghai kerang technology co ltd
|
IEC 60598 Clause 4.14.3 Servo Motor Led Test Lamp
|
...Testing Equipment Adjusting Device IEC60598 Information: The test equipment is designed and manufactured according to 4.14.3 of IEC 60598-1, mainly used for the lamps adjustment devices’ torsion, and bending test of the table lamps with adjustable tilt and position , floor lamps and the lamps which are for professional use (such as a plotter lamps) . The test device......
Guangzhou Shice Equipment Co., Ltd.
|
PTL Ip67 Led Luminaire Ingress Dust Testing Equipment
|
...used for checking the proteced against solid foreign objects to verify the degrees of protection IP5X "Dust-protected" and IP6X "Dust-tight" Test equipment The tests are carried out by means of a PTL dust test chamber with a sealed test cabinet, in which...
Xi'An LIB Environmental Simulation Industry
|
Submit your “iec 60598 1 luminaires test device” inquiry in a minute :