Axial Force Of Edson Caps Test Equipment IEC 62560 Luminaries Test Equipment
![]() |
...used for checking the axial strength of the Edison cap. Technical parameters: Samples and restrictions Edison lamp cap Test purpose Used to detect the mechanical strength of caps of Edsion lamps. Test principle Use a motor-driven pressure plate to apply a...
Sinuo Testing Equipment Co. , Limited
|
Ground Recessed Luminaires Light Testing Equipment IEC 60598-2-13
![]() |
...Light Testing Equipment IEC 60598-2-13 Production introduction: This test equipment conforms to IEC 60598-2-13 clause 13.6.1 and clause 13.6.2 standard requirements. It is used for the ground accessed luminaires static load test and torque test. This equipment......
Guangzhou HongCe Equipment Co., Ltd.
|
100N Impact LED Light Testing Equipment IEC 60598 1 Clause 8.15.1
![]() |
... to the standard requirements of IEC 60598-1 clause 8.15.1 for handlamps having a handle or shell of flexible material, such as rubber or polychloroprene, compliance shall be checked by the following test. The parts of the handlamp which are gripped in...
Dongguan Kingpo Technology Limited
|
Flexing Pipe Winding Light Testing Equipment 10 Test Times IEC 60598 2 20
![]() |
Flexing Pipe Winding Test Device HDJ0005 Our company has a core team with years of technology development, technology transfer, technical consulting, technical services experience, providing Appliance Test Equipment, Medical Device Testing Equipment, ......
shanghai kerang technology co ltd
|
IEC60598-1- Figure29 Light Testing Equipment Parts Luminaries Test Chain
![]() |
IEC 60598 Luminairy test chain Conform to IEC60598 4.26.3 Figure 29 Test chain: A chain of sufficient length of an uncoated metal, having links in accordance with Figure 29 and made of 63 % Cu/37 % Zn. The chain shall have a resistance value of 2,5 Ω/m ± ......
KingPo Technology Development Limited
|
Arrangement For Impact Test Light Testing Equipment
![]() |
IEC 60598-1 Clause 8.15 Arrangement For Impact Test For Handlamps Technical parameters: Steel jaws width 15mm Steel jaws radius 2.5 mm The force applied through the jaws 100 N Standard IEC 60598-1 clause 8.15 Product information: This test apparatus is ......
Guangzhou Shice Equipment Co., Ltd.
|
IEC 61851 EVSE Testing Equipment Electric Vehicle Charging Pole IPXXB Test Probe
![]() |
...Test Probe EVSE Testing Equipment Equipment Overview This is a precision test finger made in accordance the requirements of IEC 61032 test probe, required by many standard such as IEC 61851-1 clause 8 and 12.4, IEC 60529 IP2, etc. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test......
Sinuo Testing Equipment Co. , Limited
|
Fire Resistance Test Furnace IEC 60331 , Impact Test Equipment For Wire / Cable
![]() |
IEC 60331 Wire and Cable Fire-resistance Impact Testing Equipment Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire resistance of cable wiring or power grid, burning in not less than 830 degrees, the flame, and exerts certain impact vibration, cable integrity test circuit. Standards: IEC 60331 Testing of wire and cable - circuit integrity under flame conditions IEC......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
IEC 60754 Wire Testing Equipment , Cable Halogen PH And Conductivity Testing Equipment
![]() |
... cables and the determination of gas acidity by measuring ph and conductivity. Remark: - IEC 60754-1, 2 Electric Cables Halogen Acid Gas Release Tester, Cable Corrosion Tester measures gas volume of Halogen Acid (IEC 60754-1), pH concentration(PH Meter,...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
IEC 60331 Burning Testing Equipment For Electric / Optical Fibre Cables Circuit Integrity
![]() |
... whether keep circuit integrity under fire conditions. Standards: GB/T19216 Test for electric or optical fibre cables under fire conditions---Circuit Integrity--Procedures and requirement for fire with shock--Cables of rated voltage up to and ......
Dongguan Hust Tony Instruments Co.,Ltd.
|