IEC 60065 Test Probe D 1mm Diameter 100mm Length For Hazardous Live Test
|
... for earth or antenna or for audio, video or associated signals, shall not involve the risk of an electric shock. The test is not applied to TERMINALS marked with the symbol of 5.3 b). Test Finger Probe NOTE See also 1 5.1 .2. Compliance is checked by...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 61032 test probe 41,test probe, safety test cone probe,test probe
|
... probe 41 Model TP41: IEC 61032 test probe 41 For testing accessibility in appliances with visibly glowing heating elements. Also for testing parts supporting such elements. Complies with IEC, EN, UL & CSA requirements. Made entirely of stainless steel....
ALLIED TESTING (HK) CO.,LTD.
|
IEC 62368 Test Probe Kits
|
... 20 mm Terminal Probe 1) Straight Unjointed Test Probes 2) Figure V.2 - Jointed Test Probe 3) Figure V.3 - Blunt Probe 4) Figure V.4 - Wedge probe 5) Diameter 1 mm, Length 20 mm Terminal Probe Company introduction HK LEE HING INDUSTRY CO., LIMITED are...
HK LEE HING INDUSTRY CO., LIMITED
|
IEC 61032 Test Probe 1 Figure 5 Ф50mm For Enclosures Against Ingress Test
|
IEC 61032 Test Probe 1 Figure 5 Ф50mm For Enclosures Against Ingress Test Product information: This probe conforms to standard requirements of IEC 61032 test probe 1 figure 5, and required by many standards such as IEC 60529 for IP1 testing, IEC 60335-1, IEC 60065 and etc. This test probe......
Sinuo Testing Equipment Co. , Limited
|
Nylon Material Iec 61032 Test Probe Against Access To Hazardous Mechanical Parts
|
IEC61032 Test Probe 31 Test Cone Made by Nylon Third - Lab Calibration Certificate Available Introduction: It is designed according to IEC61032 figure 14, this probe is intended to verify the protection against access to hazardous mechanical parts of the ......
Pego Electronics (Yi Chun) Company Limited
|
IEC60335 / IEC60950 / IEC 61032 Test Probe B Jointed Test Finger Metal Material
|
material: metal, except where otherwise specified linear dimensions in milimeters tolerance on dimensions without specific tolerance: on angles: 0/-10° on linear dimensions: up to 25mm: 0/-0.05 over 25mm: +/-0.2 both joints shall permit movement in ......
KingPo Technology Development Limited
|
IEC 61851 EVSE Testing Equipment Electric Vehicle Charging Pole IPXXB Test Probe
|
...Test Probe EVSE Testing Equipment Equipment Overview This is a precision test finger made in accordance the requirements of IEC 61032 test probe, required by many standard such as IEC 61851-1 clause 8 and 12.4, IEC 60529 IP2, etc. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test......
Sinuo Testing Equipment Co. , Limited
|
IEC 60335 Test Finger Probe
|
... Probe Meets Requirements for Testing Standard(s) including but not limited to:IEC 60950 EN 60950 UL 60950 CSA 950. Hot Tags: iec 60335 test finger probe, China, manufacturers, suppliers, factory, custom, wholesale, IEC60065:2014 Hi-pot (Voltage Withstand)...
Dongguan Kingpo Technology Limited
|
IEC61032 IEC60529 IP2X Test Probe B Test Finger
|
...:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm 5According to :IEC60065, IEC 60335-1, IEC 60529, IEC60884-1, IEC60950, IEC61032, IEC69745-1 Application:...
HongKong Bonad Technology Limited
|
Stainless Steel IEC 60335 Test Finger Probe 18 Ф8.6
|
IEC 61032 Figure 12 Test Probe 18 Small Finger Probe Ф8.6 This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children of more than 36 months and less than 14 years. Probe Dimension: Parameters /Model Children’s finger probe SC-F1218 Hemispherical radius (mm) R4.3±0.05 Finger probe......
Guangzhou Shice Equipment Co., Ltd.
|
Submit your “iec terminal test probe c” inquiry in a minute :