Knee Joint Probe Medical Surgical Equipment Precision Safety
|
...Joint Probe Medical Surgical Equipment Precision Safety Indications: Ligamentolysis, meniscus-ectomy (knee, shoulder, hip joint). Parameters: Probe angle 50° Quantity of pins 2 pins Article number GK408M18-1 Features: Low temperature cutting and coagulation during joint surgery. light pain. Short hospital time. Foot switch. Finger switch is optional. Our commitment: Sufficient stock enable constant supplies. Ensure high-quality of each probe...
Chengdu Mechan Electronic Technology Co., Ltd
|
IEC 61032 Figure 2 Jointed Probe For Equipment And Persons Enclosures Protect
|
IEC 61032 Figure 2 Jointed Probe For Equipment And Persons Enclosures Protect Product information: The joint test probe of figure V.2 is in accordance with many standards like IEC 61032 figure 2, required by IEC 62368-1:2018 clause 5.3.2, 8.5.4.3, V.1......
Sinuo Testing Equipment Co. , Limited
|
UL Standard / IEC 62368-1 Figure V.1 heat-treated steel Jointed Test Probe Simulating Human Finger Movement
|
...Jointed Test Probe Simulating Human Finger Movement Application: This jointed Test Finger Probe is strictly designed and manufactured according to UL507,UL982,UL1278,UL1062,UL1310,UL474,UL60065 . Palm simulator and restricted joint movement simulates human finger movement. Made of all nylon. Bell-Core accessory available.This ul jointed test finger probe......
KingPo Technology Development Limited
|
Metal Material Test Probe Kits Wedge Probe Jointed / Rigid Test Finger IEC60950-1
|
...Probe Kits (Wedge Probe, Jointed Test Finger, Rigid Test Finger and Test Pin) 1. Introduction The test probe kits are meet the requirement of IEC60950-1, includes jointed test finger, test pin, unjointed test finger, TNV test probe and wedge probe, they are applied to test the person’s protection from live parts and hazardous parts of information technology equipment. 2. Specification Name Figure number Parameter Jointed......
Pego Electronics (Yi Chun) Company Limited
|
Jointed child Finger Probe, test finger probe,safety access test probe,test probe
|
Jointed child Finger Probe, test finger probe,safety access test probe Model TP18 Jointed Child Finger Probe ( 0 - 36 months ) Model TP19: Jointed Child Finger Probe ( 3 - 14 years ) These size test fingers are to test for protection against access to hazardous parts with a human finger and / or arm. These are high precision probes......
ALLIED TESTING (HK) CO.,LTD.
|
IEC 60529 IP2X Jointed Test Finger Probe R2 Cylindrical Length 80mm
|
... standard. The IEC 60529 IP2X Jointed Test Finger Probe is intended to verify the basic protection against access to hazardous parts. It’s also used to verify the protection against access with a finger. Conforms to: This is the “international”...
Dongguan Kingpo Technology Limited
|
Stainless Steel IEC 62368 Figure V.5 Terminal Probe
|
...Probes IEC62368 probe no. Probe Name IEC 62368 Figure V.1 Jointed test probe for equipment likely to be accessible to children IEC62368 Figure V.2 Jointed test probe for equipment like to be accessible to children IEC62368 Figure V.3 Blunt probe, Telecom Test Probe IEC62368 Figure V.4 Wedge probe IEC62368 Figure V.5 Terminal probe I) IEC 62368 Figure V.1 Jointed test probe......
Guangzhou Shice Equipment Co., Ltd.
|
Children Test Finger Probe 18 and 19 , IEC61032 Jointed Children Test Finger
|
.... It is used to simulate the children who are older than 36 months and younger than 14 years to test whether the hazardous parts can be touched. Children finger probe HT-I13 conforms to IEC61032 figure 13 finger probe 19, IEC335.1,UL1017 standards....
Guangzhou HongCe Equipment Co., Ltd.
|
3 Wire RTD PT100 Thermocouple Temperature Probe Stainless Steel Transition Joint
|
...its mass or size. The larger the sensor, or probe assembly, the slower the reading. A thermistor is made of a bead of carbon with two wires attached. It is then coated with epoxy or glass. Though most thermistors are somewhat large (fitting an 1/8” or...
Ningbo Leadkin Instrument Complete Sets of Equipment Co., Ltd.
|
GB4706.1-2005 Test Probe Kit of Jointed Finger Probe | Test Pin Probe | Test Thorn Probe
|
...Probe Kit of Jointed Finger Probe | Test Pin Probe | Test Thorn Probe Meets GB4706.1-2005. Accessibility probes are used to test the size of openings to ensure that fingers and objects do not have access to hazardous parts in equipment and machinery. SPECIFICATIONS 1. Jointed Finger Probe: Precision probe......
HK LEE HING INDUSTRY CO., LIMITED
|
Submit your “joint probe” inquiry in a minute :