IEC60320-1 Appliance Couplers Maximum and Minimum Withdrawal Force Testing Equipment
|
...-1 figure 3 and figure 4 and clause 16, for verification of the maximum and minimum withdrawal force of connector/appliance outlet. The minimum withdrawal force is verified by inserting the test pin gauge to each individual connector/appliance outlet. The...
Pego Electronics (Yi Chun) Company Limited
|
EV Charging Gun Connector Withdrawal Force Test Equipment IEC 62196-1
|
EV Charging Gun Connector Withdrawal Force Test Equipment IEC 62196-1 Equipment Overview The force of inserting the charging gun into the socket: vertically downward the charging gun, place the main weight required by the standard on the charging gun, and......
Sinuo Testing Equipment Co. , Limited
|
Switched Socket Outlets Vehicle Connectors Withdrawal Force Test Apparatus
|
... 14.1.6, fig13, fig14, table 5.It is used to check the maximum force required when the plug is pulled out of the socket-outlet or connector. Technical parameters: 1. The frame is composed of a bottom plate, a column, a sample installation fixture, and a...
Sinuo Testing Equipment Co. , Limited
|
Insertion Force And Withdrawal Force Test Machine For Connectors ISO Insertion Extraction Force Testing Equipment
|
...Force Test Machine Product introduction Insertion Force Testing Machine is suitable for connectors insertion and withdrawal force tests, the use of unique device automatically matched to find the heart of a variety of special fixture connector, the plug can be completely accurate force results. All the testing informations are setting by the computer and it can automatically store testing condition,test......
SKYLINE INSTRUMENTS CO.,LTD
|
Harden Steel Plug Socket Tester IEC60884 Figure 18 And 19 Verification Of Maximum Withdrawal Force Test Apparatus
|
...Withdrawal Force Test Apparatus Application: This device complies with the requirements of IEC60884 Figure 18/19, VDE0620, etc. It is suitable for checking the maximum force required to pull the plug out of the socket and the single pole pin pulled out from the socket assembly. Whether the minimum force......
KingPo Technology Development Limited
|
Safety Furniture Testing Machines , Large Products Package Clamp Force Testing Equipment
|
...Testing Machines , Large Products Package Clamp Force Testing Equipment 1. Before placing the packaged product between platens, verify that the clamp force using the clamp indicator. The indicator should be placed between the axes of the platen articulation points approximately 1/2 way up the platens. 2. Each time the product is clamped, the force should be applied for a minimum......
Dongguan Haida Equipment Co.,LTD
|
Minimum Ignition Temperature Testing Equipment EN 50281 For Electrical Products
|
Minimum Ignition Temperature Testing Equipment Introduction Minimum Ignition Temperature Testing Equipment is a way of testing the sensitivity of the ignition that the dust cloud is in the heated environment. When a lot of dust is exposed in heating the air and the air temperature is high enough, it may lead to spontaneous combustion. This method can test the minimum......
Advanced Instruments Co.,Limited
|
1PH, AC220V, 50/60Hz Shearing Force Testing Equipment With 200KG,500KG Optional Capacity
|
...Force Testing Equipment With 200KG,500KG Optional Capacity Uses KJ-1068 is used in the industry of siliceous material,solar energy panel,solar energy material,electric wire and electron.It can be used to test all kinds of physical properties of finished or semi-finished products.Choose different clamps,you can do the test of tensile,resist compression,bending, shear, peel, loop tack and fatigue force......
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
0.5KN Dual Station Insertion And Extraction Force Testing Machine For Plug And Pull Force Testing Equipment
|
0.5KN Dual-Station Insertion And Extraction Force Testing Machine For Plug And Pull Force Testing Insertion Extraction Force Test Machine IF5112 *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height......
Infinity Machine International Inc.
|
Programmable Touch Screen Insertion and Extraction Force Test Equipment for Connectors
|
.... Test load: 50Kg. Unit switching: Kgf, Nf, Lbf. Test stroke: 0 ~ 60mm (without clamps). Test speed: 5~30 times/min adjustable. The machine can measure tensile, tearing, peeling, splicing resistance, etc. of various materials; resistance ......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Submit your “minimum withdrawal force testing equipment” inquiry in a minute :