IEC62196-1 Clause 26.4 EV Plug And Vehicle Connector Cable Bending Test Apparatus For Flexing Test
|
... to IEC62196-1 clause 26.4 figure 20 and table 14, it is applied to do mechanical load flexing test of the non-rewirable accessories of ev plug and vehicle connector. Test method: The sample is fixed to the oscillating member of the apparatus so that at...
Pego Electronics (Yi Chun) Company Limited
|
Multi Conductor Cable 90° Bending Testing Cable Flex Cycle Test Machine
|
Multi Conductor Cable 90° Bending Testing Cable Flex Cycle Test Machine Model:C5092 Purpose: Cable bending test machine is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable......
Infinity Machine International Inc.
|
IEC 60227-2 Cable Testing Equipment Bending Test Apparatus For Tinsel Cord 0-1A Output Current
|
...h 60 000 bending cycles, i.e. 120 000 single strokes, interruption of the current shall not occur. Cable Testing Equipment After the test, the sample shall withstand the voltage test carried out in accordance with 2.2 of IEC 60227-2, the voltage, however,...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60702-1 Clause 13.6 Bending Test Apparatus For Mineral Insulated Cables
|
...IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to drive the turntable to rotate. For 500V cables a...
Sinuo Testing Equipment Co. , Limited
|
IEC 60598-2-21 Figure 2 Cold Bend Test Apparatus To Measure Dynamic Bending Performance Of Wire And Cable
|
...Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diameter less than or equal to 12.5mm round wire and cable or round insulated wire core is the wire and cable industry to test the bending......
KingPo Technology Development Limited
|
IEC 60702-1 Clause 13.6 Electric Vehicle Cables Bending Test Apparatus
|
... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to drive the...
Sinuo Testing Equipment Co. , Limited
|
IEC-60794-1-2 Standard Fiber Optic Cable Repeated Bending Test Equipment
|
... Test Equipment: Optical Fiber Cable Repeated Bending Tester is used to determine the ability of a fiber optic cable to withstand repeated bending (cyclic flexing). Optical Fiber Cable Impact Tester Series allows a cable sample to be bent backwards and...
Dongguan Wirecan Technology Co.,Ltd.
|
IEC60851-3 Bending Test Apparatus For Flat Wires With Test Bars
|
Performance Characteristics 1.Executive standard: GB/T4074.3-2008,IEC60851-3; 2.This bending test apparatus is applicable to the bending test of various enameled flat wires, paper wrapped flat wires, glass fiber wrapped flat wires, film wrapped wires and ......
Advanced Instruments Co.,Limited
|
Optical Cable Repeated Bending Fatigue Wire Testing Equipment IEC 60794 GB/T 7424.2 - 2008
|
*, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height: 1.5;-webkit-font-smoothing: antialiased;}p[style^="text-align"] img{display:inline-block}input, button, textarea, select {font: inherit;}p, h1, h2, ......
Dongguan Neide Technology Co., Ltd
|
Computerized Single - Column Tensile Test Apparatus For Metal Tensile Testing
|
..., such as rubber, plastic, wire and cable, fiber optic cable, safety belt, safety belt, leather belt composite, plastic profile, waterproof coil, steel pipe, copper, profile, spring steel, Stretching, compression, bending, shearing, peeling, tearing,...
ASLi (CHINA) TEST EQUIPMENT CO., LTD
|
Submit your “multi cable cyclic bending test apparatus” inquiry in a minute :