Cable Bending Cycle Testing Machine For Multi Wire Cable Bending Test
|
... cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after some...
Infinity Machine International Inc.
|
Electric Drive Cable Bending Tester For Cable Bending / Swinging / Loading Test
|
... Weight 87kg Volume 91×55×99cm Test standard UL, IEC, VDC Equipment Description: The cable bending tester is used for testing bending resistance of outgoing line of power plug and wires. Fix the wires by fixture and add specific load. During test, the...
KingPo Technology Development Limited
|
Multi Network Cable Line Tester BNC Data Ethernet Lan RJ45 RJ11 Wire Cable Tester
|
... and switch port. Check lead continuity Main function Wire Track Directly track wire type: RJ45, RJ11 Track other wire through the attachment Sequence Collation Open circuit, short circuit, detection of cable line sequence Network Wire Collation It can...
Guilin Huayi Peakmeter Technology Co., Ltd.
|
Laboratory Cable Bending Tester Positive Turn Positive Revere Mode Option
|
Wire/Cable Bending Tester (MY-XC-360-R), Sheet metal material with white color Description This testing machine is customized according to the "General Safety Requirements for ......
Shenzhen Mingyu Instrument And Equipment Co., Ltd.
|
Anti Corrosion Cable Flex Tester , 60c.P.M Cable Bending Tester
|
... Bending Fatigue Test Machine apply for bending endurance test for cable connected with plug.Fix the sample on jig and put the weight at the cable, then to swing the jig right and leftwith the setting angle. after rotating to required cycles then stop to...
Dongguan Wirecan Technology Co.,Ltd.
|
IEC 60851-3 FCB-I Flat Wire Circular Bending Tester With Two Hosts
|
...wire’s cross section 16mm or less than 16mm, such as enameled wires, paper-covered wires, fiber-glass covered wires, film-covered wires and the responding flat copper wires and aluminum wires. Bending Host NO.1 and NO.2 two hosts Diameter of Flange NO.1...
Dongguan Zhongli Instrument Technology Co., Ltd.
|
UL1581-1990 Cable Testing Equipment / Wire Cable Spark Tester
|
Wire Cable Spark Tester , Electrical Wire Spark Tester Product information: Wire Cable Spark Tester complies with the standard requirement of UL1581-1990. It is indispensable test equipment for testing the quality of insulating layer with high voltage during the productive process of electric wire and cable. These series of testers......
Guangzhou HongCe Equipment Co., Ltd.
|
RSDGC-3H Intelligent Multi Pulse Cable Fault Tester 1 Year Warranty
|
... and the device for high- frequency and high- voltage data signal. Equipped with the best cable fault waveform judgment ability and the most simple and convenient operating system. Multi-pulse method greatly simplifies the fault waveform measured in...
Wuhan Rising Electric Co., Ltd.
|
Copper Wire Cable Spark Tester , 250-300mm/Min Elongation Testing Machine
|
... elongation. The tester is testing elongation of metal materials; Using advanced software program and sophisticated electronic sensing technology to measure the elongation of tensile ......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
UL87 200W Bending Angle Adjustable Cable Bending Tester
|
Bending angle 10-360° Adjustable Wire Bending Test Machine Wire Life Testing Apparatus Application Test plug lead wire and the bending strength of the wire, can be automatically counted at the same time show the conductor resistance of the wire, the test ......
Guangdong Aisry Instrument Technology Co., Ltd.
|