IEC 60068-2-75 Vertical Drop Weight Impact Testing Machine For Luminaries Merchanical Verify
|
...Vertical Hammer Test Apparatus Description: This device is intended to test the mechanical strength test of the shell of the electric appliance for house hold and similar purpose, as well as test drop impact resistance of the lamp. Drop height adjustable; Impact hammer......
Guangzhou HongCe Equipment Co., Ltd.
|
Low Energy Steel Vertical Pendulum Hammer 1000mm Impact Test Apparatus
|
...-2-75, IEC0884-1 fig 22-26. It is used for the mechanical strength test of household and similar use of plug socket, some electrical accessories like switch and shroud etc. The test apparatus consists basically of a pendulum rotating at its upper end in...
KingPo Technology Development Limited
|
0.7J impact test hammer,machanical impact test,spring hammer test
|
...impact test hammer,machanical impact test,spring hammer test AT SIT10 0.14/0.2/0.35/0.5/0.7/1.0J select one energy AT SIT12 2J spring hammer AT SIT50 0.14/0.2/0.35/0.5/0.7/1.0J contain all The 0.7J impact test hammer,machanical impact test,spring hammer test from Allied Testing is designed and manufactured to perform the test specified in many standards to determine compliance with requirements concerning Mechanical Strength. 0.7J impact...
ALLIED TESTING (HK) CO.,LTD.
|
IK01 (0.14J) to IK11 (50J) Pendulum Hammer Mechanical Impact Test Apparatus IEC62262
|
...Hammer Mechanical Impact Test Apparatus IEC62262 1. Introduction The pendulum hammer mechanical impact test apparatus can meet the test requirements of IEC60068-2-75 test Eha and IEC62262. The equipment consists of striking elements, swing pipes and test rig. The striking elements for IK07 (2J) to IK11 (50J) is made of steel, the striking element for IK01 to IK06 tests......
Pego Electronics (Yi Chun) Company Limited
|
IEC 60745 Electric Hammer Durability Impact Test Equipment For Hand Held Motor
|
...Hammer Durability Impact Test Equipment For Hand Held Motor Product Information: This electrical hammer durability impact test equipment conforms to IEC 60745-2-1 clause 17 and IEC 60745-2-6 clause 17 and figure 103. This apparatus is applicable to durability test for hand held motor operated electric tools such as electric hammers, Electric drills and impact......
Sinuo Testing Equipment Co. , Limited
|
Pipe Drop Hammer Manual Impact Testing Machine For Plastic
|
...Hammer Plastic Impact Testing Equipment Usage: It is used to determine the resistance to external blows of thermoplastics pipes of circular cross-section. Test pieces are subject to blow from a falling striker, of specified mass and shape, dropped from a known height onto specified position around the circumference of the test piece. The true impact......
Beijing Jinshengxin Testing Machine Co., Ltd.
|
Vertical 20times/Min Impact Testing Machine Fiber Optic Cable Test Equipment
|
...Optical Fiber Cable Impact Testing Machine is intended to determine the ability of optical fiber cable withstand impact. Apparatus The apparatus allows a hammer with a 25mm rounded edge to drop vertically on a cable sample fixed on a flat steel plate. The...
Dongguan Wirecan Technology Co.,Ltd.
|
IEC 60068-2-75 Figure A.5 20J Vertical Hammers for IK10 Test Ehc Striking Element
|
... 80 100 125 Company introduction HK LEE HING INDUSTRY CO., LIMITED are specialized in manufacturing special, custom built, test and measuring equipment for products testing as per...
HK LEE HING INDUSTRY CO., LIMITED
|
Falling Film Resistance Charpy Impact Test Machine 220V With Digital Display
|
... good samples for reserve. 2. Determine the weight of the hammer. 3. Put the hammer rod on from the sliding sleeve under the hammer seat, put the selected weight on the hammer rod, and tighten the nut. 4. Turn on the power and enter the working state. 5...
Guangdong ALI Testing Equipment Co,.Ltd
|
Vertical Hammer Drop Weight 10J Impact Testing Apparatus
|
... The way of releasing by manual Product details: The vertical hammer impact apparatus conforms to the standard requirement of the IEC60068-2-75 Test Ehc, UL498 clause SD7.2. This device is intended to test the mechanical strength test of the shell of the...
Guangzhou Shice Equipment Co., Ltd.
|
Submit your “vertical hammer 220v impact testing” inquiry in a minute :