10a 10v source measure unit

Brand Name:Keithley

Model Number:2401

Place of Origin:US

...Source Measure Unit Description of Keithley 2401 Keithley’s Standard Series 2400 Source Measure Unit (SMU) Instruments offer four-quadrant precision voltage and current source/load coupled with measurement. Each SMU instrument is both a highly stable DC power source and a true instrument-grade 6½-digit multimeter. The power source...

Brand Name:BWSENSING

Model Number:IMU50

Place of Origin:CHINA

... of the moving carrier. It is suitable for inertial attitude measurement in motion or vibration state. It adopts MEMS accelerometers and gyroscopes with high reliability, and the error source is greatly eliminated through nonlinear compensation,

Brand Name:Saving

Model Number:DDZY1218

Place of Origin:China

... access. Equipped with 4 digital input channels, the Data Concentrator Unit is capable of collecting data from multiple sources simultaneously. The input voltage range of 0-10V ensures that the unit can handle a wide range of input signals, making it

Brand Name:CHN spec

Model Number:CS-700

Place of Origin:China

Packing Material Plastic Film Transparency Meter for Haze and Transmittance Transparency Meter Technical Data Type Haze Meter CS-700 Light Source CIE-A,CIE-C,CIE-D65 Standards ASTM D1003/D1044,ISO13468/ISO14782 Parameters HAZE,Transmittance(T) Spectral ...

Brand Name:3nh

Model Number:NHG60M

Place of Origin:P.R.China

...Measurement Units Connected To PC With Small Aperture Description NHG60M Digital Gloss Meter adopts small aperture 1.5*2mm, with 60° angle, manufactured according to ISO2813 and GB/T 9754. It is also compatible with the standards of ASTM D523, ASTM D2457. NHG60 conforms to JJG696 first class gloss meter working requirement, corresponding with CIE 1931(2°) under CIE C light source...

Brand Name:LIYI

Model Number:LYHV-1000

Place of Origin:China

Thermal Printer Glossy And Graceful Exterior Micro Vickers Hardness Testing Machine Specification: 1. The optical system designed by our senior optical engineer not only meet the definition of hardness testing requirements, but also can observe the micro ...

Brand Name:3nh

Model Number:NHG268

Place of Origin:Shenzhen,China

NHG268 Tri-Angle Intelligent Gloss Meter 2000gu with GQC6 Glossy Quality Control Software Brief Introduction: NHG268 gloss meter features with 20, 60 and 85° angle, manufactured according to ISO2813 and GB/T 9754. It is also compatible with the standards...

Brand Name:AOS

Model Number:AO4485

Place of Origin:original

... On) 4.5V, 10V Rds On (Max) @ Id, Vgs 15mOhm @ 10A, 10V Vgs(th) (Max) @ Id 2.5V @ 250µA Gate Charge (Qg) (Max) @ Vgs 55 nC @ 10 V Vgs (...

Brand Name:Yunyi

Place of Origin:China

... Type 4~20mA 0-10V DC Wind speed sensor air velocity sensor ducted type 4~20mA 0-10V DC designed for pipeline wind speed measurement. With high-precision wind speed measurement unit has a sensitive response, can quickly and accurately measure small wind ...

Place of Origin:ShenZhen China

Brand Name:Hua Xuan Yang

Model Number:HXY4466

... to provide excellent RDS(ON) and low gate charge. This device is suitable for use as a load switch or in PWM applications. The source leads are separated to allow a Kelvin connection to the source, which may be used to bypass the source inductance.

Model Number:IRF740B

Brand Name:Original

Place of Origin:US

...Oxide) Drain to Source Voltage (Vdss) 400V Current - Continuous Drain (Id) @ 25°C 10A (Tc) Drive Voltage (Max Rds On, Min Rds On) 10V Rds On (Max) @ Id, Vgs 600mOhm @ 5A, 10V Vgs(th) (Max) @ Id 5V @ 250µA Gate Charge (Qg) (Max) @ Vgs 30nC @ 10V Vgs (Max...

Brand Name:SHENGDI TECHNOLOGY

Model Number:HS-3122

Place of Origin:CHINA

...Source is a product used as power source supplying power for different type of Single Phase & Three Phase Meter. 1. Power supply: Single Phase 220V±15%,50Hz. 2. Output Voltage: Measurement Range:57.7V,100V,220V,380V Output Capacity: ＞20VA(The rated measurement range) 3. Output Current: 5~10A...

Brand Name:WDLYCH

Model Number:WDZ96-Mpa

Place of Origin:China Mainland

Marine Dc 10v Input Water Pressure Meter 1% Accuracy Class 4-20ma Output 1. Products Description: This type of meters are analog electric measuring instruments, widely used for measuring AC/DC current, voltage, frequency, power,power factor, insulation ...

Brand Name:EWT

Model Number:EWT-12V100

Place of Origin:China

*, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height: 1.5;-webkit-font-smoothing: antialiased;}p[style^="text-align"] img{display:inline-block}input, button, textarea, select {font: inherit;}p, h1, h2, ...

Place of Origin:China

Brand Name:Kingsine

Model Number:KS803

AC Power Measurement Voltage (AC) Output Shift:10V/30V/100V/300V/750V Auto switch Current (AC) Output Shift:100mA/1A/5A/10A/25A Auto switch Work power supply range:220VAC±15%, 50Hz PC connection:RS232 Large LCD display, English pop-up menus in operations! ...

Brand Name:Yushen

Model Number:SDNA-075Y, SDNA-090YB

Place of Origin:China

...high-efficiency condenser with the evaporator and the inlet expansion valve. The four components are perfectly matched. 2, reliable operation ◆ The unit has 7 kinds of safety protection measures to ensure the normal operation of the unit. ◆ The unit is

Brand Name:OEM

Model Number:91L16

Place of Origin:ZHEJIANG,CHINA

40*40mm Series Analog Panel Meter Application: 91L16,91L18,48*45mm series voltmeter are applicable to voltage stabilizer,Battery charger,Automatic Charger,Generator,Electric Power Inverter Equipment and so on. 91L16 series Square Panel Meter: Full ...

Brand Name:CHX

Model Number:CHX-DM002

Place of Origin:CHINA

...test. Do not live measurement resistance, capacitance, diode and test circuit off. In the current, resistance, capacitance, diode and line continuity test range, care should be taken to avoid connecting the meter to the voltage source. Do not measure the

Brand Name:SOCHI

Model Number:Y-TEK-2

Place of Origin:China

...: Sliver Induction principle: Laser Load power: 13mW Output form: TTL 2.Descriptions: It is a measuring tool for CNC lathe,used in various CNC tool measuring systems. Also called photoelectric sensor or dust sensor. Laser induction, in time to find out the