blender accessibility probe

Brand Name:kingpo

Place of Origin:china

... A blender container shall not break or crack during normal use. 30.4.4.2 A blender employing a thermoplastic container shall be subjected to the test outlined in 30.4.4.4– 30.4.4.7. 30.4.4.3 A blender employing a glass container shall be subjected to

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I14

...Probe 31 IEC61032 Figure 14 , Access Probe To Hazardous Mechanical Parts Product information: Food waste probe 31 confirms to IEC61032 figure 14 standard. It is used for checking food waste disposal units of milling system of hazardous mechanical parts whether is touched or not. Rod: Ø25mm, 80mm long, interchangeable metal or Delrin probe. It conforms to the IEC61032 Test probe...

Brand Name:kerang

Model Number:HT-I24

Place of Origin:CHINA

Blender Probe HT-I24 Standard:IEC60335-2-14 CI.20.102. Application:It is used to test whether the blade of hand-held stirrer is completely concealed from above and flat surface can be touched when the blade is rotating. Test sample:Handheld blender. Feature:The test is achieved by applying a cylindrical rod from any position where the angle between the probe...

Brand Name:SHC

Model Number:SC-UL1310 S3252

Place of Origin:China

...Accessibility Probe UL1310 Figure 16.4 S3252 Accessibility Probe Fan Finger Guard Product details: The UL1310 S3252 test probe conforms to standard requirement of UL1310 Fig 16.4(S3252). It is used for testing accessibility to hazardous moving parts such as access to fan blades through a fan finger guard. The handle is nylon while the tip is stainless steel. Product Parameters: Probe...

Model Number:TP01

... and access testing Model TP01 Test Sphere Probe Test Probe is intended to verify the protection of person aganist access to to harzardous parts of an IP1 code.Also used to verify protection from access with the back of the hand for an IP suffix A code.

Brand Name:KingPo

Place of Origin:China

...Accessibility Probe To Hazardous Moving Parts UL1310 Fig.16.4 Accessibility Probe Testing Accessibility To Hazardous Moving Parts Product details: It conforms to standard requirement of UL1310 Fig 16.4(S3252). It is used for testing accessibility to hazardous moving parts such as access...

Brand Name:YUYANG

Model Number:YY1102

Place of Origin:China

...Accessibility Probes Description: Accessibility Probes is used to determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Accessibility probes are designed for two age groups: 1. Probe...

Brand Name:SKYLINE

Model Number:SL-S13

Place of Origin:CHINA

...Accessibility Probes, Toys Safety Testing Equipment Product information To determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Accessibility probes are designed for two age groups: Probe A for 0-36 months Probe...

Brand Name:HTI

Model Number:TW-204A/B

Place of Origin:Guangdong,China(Mainland)

Accessibility Probes Toys Testing Instrument Fake Finger Touch Probe Testing Equipment Description: To determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Applications: Accessibility probes are designed for two age groups: Probe...

Place of Origin:China

Brand Name:Julixing

...openings to ensure that fingers and objects do not have access to hazardous parts in equipment and machinery. SPECIFICATIONS – Ball Probe 50mm Impact Ball with Handle IP1X: Meets IEC 60529 and is used for protection against access to hazardous parts. –

Brand Name:PEGO

Model Number:PG-TP13

Place of Origin:China

...length 15 / Test Probe 13 Made by Metal and Nylon 1. Introduction: Test probe 13 (conical short taper test pin : Φ3~4-length 15) is designed according to IEC61032 figure 9. The pin is intended to verify the protection against access to hazardous live par...

Brand Name:YUYANG

Model Number:YYT008

Place of Origin:China

... the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. ...

Brand Name:GESTER

Model Number:GT-MB06

Place of Origin:China

...ts of toys can be touched. If it is accessible, then conduct the related test according to standards so as to reduce the damage hazards for children. This tools include 2 models: Probe A and Probe B: 1. An accessible part for a toy or article intended for

Brand Name:Yizhi Konjac

Model Number:Makeup Blender Sponge

Place of Origin:China

...Blender Sponge Eco Friendly Description Makeup blender sponges are affordable and accessible. They are widely available at drugstores, beauty supply stores, and online retailers, making them an affordable addition to any makeup kit. Benefits Seamless application: A makeup blender...

Brand Name:Sinuo

Model Number:SN2210-25

Place of Origin:China

...blenders φ40 mm Cylinder Rod Test Probe Standard and Application: The φ40mm cylinder rod meets the standard requirements of IEC 60335-2-14 Clause 20.103. It is used to verify the hand-held blenders other than hand-held food mixers provided with a blender...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-11

...meet the most common standards including those from IEC, EN, UL, GB, and others. Such standards require the checking of accessibility to dangerous parts of home electronics and appliances, toys, tools, and a host of other products that are intended to be

Brand Name:GE

Model Number:9L-RS

...: Peripheral vascular, vascular access, musculoskeletal 5. Condition: ,original, in good working condition 6. With 60 days warranty Parts of GE probes we can offer: Brand Model Compatible System GE 3.5C Logiq 3/ Logiq 5/ Logiq 7/ Logiq 9/ Logiq A5/

Brand Name:Bently Nevada

Model Number:32000-16-05-08-130-03-02

Place of Origin:USA

...ough the machine case and are typically used for radially mounted transducers, whether vibration or Keyphasor measurements. Use of a Proximity probe housing allows external access to the proximity probe and its extension cable, permitting gap adjustment or

Brand Name:DAXIAN

Model Number:DX7004

Place of Origin:China

...Probe Testing Equipment for Children Safety Toys Test Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe B: for the children over 3 years old Standard Configuration: Accessibility Probes...