building materials flame propagation tester

Brand Name:Delta

Model Number:BS476-6

Place of Origin:China

..., primarily for fire protection performance evaluation of the walls and ceilings, measurement results are expressed as an index of flame propagation. During the test, the specimen is exposed to the tubular torch, heat release of the lamp is 530J / S. 2

Brand Name:DAXIAN

Model Number:DX8341

Place of Origin:China

...Building Material Flame Retardancy Tester Conform to the standard: meet the requirements of GB8625 and DIN4102 "Test Methods for the Flame Retardancy of Building Materials". Scope of application: It is mainly applicable to determine whether the building materials are flammable under the specified conditions, and all materials that have passed the combustion shaft furnace test and can pass the flammability test of building

Brand Name:AI

Model Number:FPT

Place of Origin:China

INTRODUCTION BS 476 part 6 specifies a method of test, the result being expressed as a fire propagation index, that provides a comparative measure of the contribution to the growth of fire made by an essentially flat material, composite or assembly. It is ...

Brand Name:SKYLINE

Model Number:SL830

Place of Origin:China

...-501 Thermal Radiation Flame Propagation Tester with Stainless Steel Test Box Product introduction The thermal radiation flame propagation tester is developed according to the French building materials and railway vehicle flame retardant test standard NF...

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

... against the perils of fire. This remarkable piece of equipment is designed to meticulously evaluate the flame propagation characteristics of textiles and films, providing crucial insights that shape industries and protect lives. 1. Product Name and

Brand Name:YUYANG

Model Number:YYF020

Place of Origin:China

...Flame Propagation Tester, Single Cable Flame Propagation Testing Machine Description: Wire and Cable is second-largest industry. Single wire and cable vertical burning tester is the most widely used and low cost of cable fire performance test equipment; Single wire or cable burning tester meet the national standard GB /T18380.11-2008 / IEC60332-1-1: 2004 requirement. It is to test flame...

Brand Name:HOOHA

Model Number:ZY6256

Place of Origin:Guangdong

...Building Material UL723 Scope of application: The experiment was conducted to determine the flame propagation rate of building materials (and to measure the concentration of smoke). The surface combustion of the test material was compared with the asbestos plywood and unprocessed red oak. Grade 0 is asbestos plywood, 100 grade unprocessed red oak floor material. The flame propagation...

Brand Name:lixian

Model Number:HZ-Building Material Fire Tester-16

Place of Origin:CHINA

... standard, conform to the standards for BS 476-7, the method of the test to determine the classification of the surface spread of flame of products. BS 476-7 is mainly used for the determination of the extension of the flame which on the exposed surface of

Brand Name:ZL

Model Number:ZL-3318

Place of Origin:China

...the technical conditions specified in the national standard GB/T8627-2007 "Smoke Density Test Method for the Burning or Decomposition of Building Materials". It is suitable for static burning of building materials and their products and other materials.

Brand Name:HOOHA

Model Number:HH52029

Place of Origin:DONGGUAN

... and optical fiber cables under fire conditions-Part 1-2: Test for vertical flame propagation for a single insulated wire or cable>. Obtain and determine wire and cable’s capability of prevent the fire from spreading under fire condition Standards: •

Brand Name:vouch

Model Number:6110

Place of Origin:CHINA

...tester of building material of model 6110 Standard :DIN 4102-1 1998,EN ISO 11925-2,DIN53438 Technical data: size of burner case(mm):750w*500d*1100h size of burner lab(mm):700w*400d*810h air conduit:diameter150mm air flow speed:0.7m/s propane flow rate:20-200ml/min can adjust flame height:5-40mm can adjust burning time:0-999.99s balance flame time:0-999.99s resolution of burning time :0.01s resolution of balance flame

Brand Name:TST

Model Number:JCK-3

Place of Origin:Shanghai

... material has flammability under the specified conditions and is developed according to the technical parameters specified by the national standard GB8626. The test furnace is in a normal combustion environment, with a small flame direct impact on the

Brand Name:BAXIT

Model Number:BXT-JL

Place of Origin:Shanghai, China(mainland)

...Flame Retardant Tester First, electrical casing flame retardant tester {PVC flame retardant electrical casing combustion self-extinguishing time (vertical combustion) tester} scope of use The flame retardant PVC electrical casing self-extinguishing burning time tester used for building cold bending electrical insulation flame retardant PVC casing and accessories flame...

Brand Name:PEGO Group

Model Number:PG-BMF

Place of Origin:China

...Building Material Flammability Tester PLC Control 1. Introduction The building material flammability tester is designed according to GB/T8626-2007 and ISO11925-2:2020 standards. In a normal combustion environment to assess the flammability of building products by direct impingement with a small flame...

Brand Name:YUYANG

Model Number:YYF053

Place of Origin:China

... propagation rate of exposed surfaces such as walls and ceilings (including solid plastics), at the same time measure smoke density. This test method applies to the exposed surface which includes ceiling or walls, provided that the materials or the whole

Brand Name:HTI

Model Number:HTB-013

Place of Origin:Guangdong,China(Mainland)

Building Materials Flammability Testing Equipment Fire Propagation Apparatus / FPA Description: This fire-test-response standard determines and quantifies material flammability characteristics, related to the propensity of materials to support fire propagation, by means of a fire propagation...

Brand Name:kingpo

Place of Origin:china

Model Number:KP-FT03

...Tester Brief Introduction Tracking tester(Tracking Index Test)is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60112 ,UL 746A ,GB/T4207,GB4706.1,ASTM D 3638-92,etc. tracking test of leakage current (Tracking Index Test)on the surface of solid insulating material...

Brand Name:HJ

Model Number:GW-2

Place of Origin:China

... wire tester is your first line of defense against fire risks. We know that behind every electronic and electrical product is a commitment to consumer safety. This test equipment designed for plastics, insulating materials and electronic components, with

Brand Name:HTTS

Model Number:HB-3000-I

Place of Origin:CHINA

Good price brinell hardness tester for detecting building materials hardness & mechanical manufacturing hardness Introduction The HB-3000-I Brinell hardness tester is an upgraded version of the traditional HB-3000. It is mainly used to greatly enhance the ...