cir65 dth tapered button bit

Brand Name:New Diamond

Model Number:Mission series

Place of Origin:Hunan, China (Mainland)

Description The new diamond diamond drill impactor works efficiently, and reliability and longevity are the advantages of our product. Impactor and drill bit are the worst in all industrial equipments, and they are uncontrollable and unpredictable in their...

Brand Name:MING

Model Number:MZ0737-7

Place of Origin:CHINA

... button Matched connection: 7 degree taper Diameter: 37mm KINGDRILLING DTH taper drill bit description: Through the taper connection on the drill bit and drill pipe, the tapered button drill bit is mostly used in conjunction with a tapered drill pipe and

Brand Name:SOLLROC

Model Number:diamond grinding pin, grinding cups

Place of Origin:China

Button Bit Sharpener Button Bit Grinder For DTH Drill Bit And Thread Button Bit Tapered Button Bits Product specifications: SC220 Bit Grinder Spindle Speed 20000 RPM Power Output 1.5 KW Working Air Pressure 0.5-0.63MPa Air Consumption 2.0m3/min Max. Water Pressure 4bar Air Hose Diameter 16mm Water Hose Diameter 8mm Button...

Brand Name:MTH

Model Number:38mm

Place of Origin:CHINA

... from 26mm to 42mm. With carbide buttons hot pressed on the bit skirts, tapered button bits have a good drilling performance and are excellent in longevity. Tapered Button Bit Description: Our tapered button bit was from high quality cemented carbide and

Brand Name:MIRCO

Model Number:11 Degrees Tapered Button Bit

Place of Origin:China

... bit. with carbide buttons hot pressed on bits bodies, it has good performace sna life time. usually used for middle-hard to very hard rock formation. Including: Tapered button bits, Chisel bits, Cross bits Diameter: 26mm to 46mm Degree: 7°, 11°, 12°

Place of Origin:China

Brand Name:Jinquan

Model Number:Threaded & Tapered

...Tapered Button Bits: We offer high quality of tapered button bits & tapered drilling equipments, these tapered drilling button bits are made with high quality of raw material through special heat treatment, various type suitable for afferent work site. The diameter of tapered bits is from 28mm to 43mm with 4 6 7 11 12 taper...

Brand Name:QIDELI

Model Number:H22/H25

Place of Origin:PUTIAN FUJIAN CHINA

...buttons taper drill bits cold pressing and hot set type button bits PRODUCT INTRODUCTION Tapered Button Bits is suitable for mining,quarring,tunneling and so on. It is widely used for gound quarring and underground drilling. 1. Our button bits is made with supper quality carbide and aloy steel. 2. After our mature heat treatment process, the performance of the product has reached the best state.Our bits...

Brand Name:HZJX

Model Number:3 3/4 "(95.3mm)~26"(660.4mm)

Place of Origin:China

low air pressure DTH rock drilling bit tools tapered buttons bit / down-the-hole drill bit Product feature of Rock Drilling Tools mining,quarring,tunneling and so on. It is widely used for gound quarring and underground drilling. Main Features 1) High ...

Brand Name:JCDRILL

Model Number:All Models

Place of Origin:China (Mainland)

... durability and wear characteristics. Specific heat treatment standards and special “stress relief” processes ensure consistent performance. DTH hammer bits are designed for maximum performance and hole cleaning ability and high penetration rate. We

Brand Name:TGC

Model Number:Tungsten Carbide Button bits

Place of Origin:China

... carbide buttons of various kinds of DTH bits(high air pressure, middle air pressure, and low air pressure) and threaded drilling bits. The preferred grade for high air pressure DTH bits The hardness for our button bits from HRA 86-90.3, and the T.R.S

Place of Origin:China

Brand Name:EST

Model Number:all types

...buttons hot pressed on bits bodies, Tapered Button Bits have a very good drilling performance and long life time. Different diameters and taper degrees are available to suit different applications in mining, quarrying etc. We can supply long skirt and short skirt Tapered Button Bits. Comparing with tapered chisel bits and tapered cross bits, button bits...

Brand Name:MIROC

Model Number:Taper Button Bit

Place of Origin:China

...air leg or hand held jack hammer driller in quarrying,and mining. Basic Information: Taper drill bit- Taper 7° Taper, 11°, Taper 12° Product Name: mining tungsten carbides taper button rock drill tool bit Types Tapered chisel bits, Tapered cross bits,

Brand Name:SUVEC

Model Number:tapered button bits

Place of Origin:China

...Tapered Drill Bit 7 Buttons 38mm 36mm 34mm Taper Button Bits Tapered drill bits are widely used in mining and quarrying, with the advantages of higher driving efficiency, long service life, better powder exhausting and easier bit back, which combine well anti-wear and anti-impact carbide butttons and high-performance steel together. Our Tapered drill bits...

Brand Name:OED/OEM

Model Number:7 degree/11°/12°/4°

Place of Origin:China

Tapered Drill Bit 12 degree 11 degree Button Bit Hex 22 Hex 25 For Hammer Rock Drilling Feature Of The Taper Button Bit: (1)Taper Angle: 4°,4°46″,6°,7°,11°,12° (2)Models: Chisel/Cross/Button Bit (3)Dia:20-45 Mm (4)Button Bit Shape: Spherical/Parabolic (5)Socket Inside Dia:15/19/22/25mm Product Name: Rock Drill Tool Tungsten Carbide Taper Button Bit Types Tapered Chisel Bits, Tapered Cross Bits, Tapered Button Bits Application:: Tapered Drill Bits

Model Number:All types

Place of Origin:China

...company is specializing in drilling rigs and drilling parts for decades. We have kinds of drilling rigs, such as DTH (Down The Hole) drilling rig, Water well drilling rig, Oil well drilling rig, Piling drilling rig with different types of Truck ...

Model Number:Mission 30

Place of Origin:China

Brand Name:Super Diamond

... DTH hammers are used for high air pressure mining dth hammerblast hole drilling and water well drilling project. Working with DTH drilling pipe and DTH drill bit, mainly applied in Mining, Marble quarry or well drilling and other construction projects.

Brand Name:ROSCHEN

Model Number:COP 32

Place of Origin:GERMANY

COP 32 90mm button bits China Cop32-90mm DTH Hammer Button Bit for Rock Drilling Product Name: DTH drill bits Description: DTH drill bits are used for blast hole drilling and water well drilling projects. Working with DTH hammer, mainly applied in Mining, ...