convex face top hammer drill bits

Brand Name:New Diamond

Model Number:T38/R38

Place of Origin:Hunan, China (Mainland)

Description Thread button drill bits are made by high quality alloy steel bar and tungsten carbides. Through heat treatment, our drilling tools are tough enough to meet rock drilling demands and have the least loss of energy while drilling the rocks...

Brand Name:QIDELI

Model Number:T45 T51

Place of Origin:CHINA

.../water holes, carbide button shape and the face shape. Super Quality--- Our button bit is made with high quality of best quality alloy steel bar and tungsten carbides, through heat treatment so that it can withstand the toughest rock drilling demands, and

Brand Name:MIROC by KSQ

Model Number:B1389-T45-S-3

Place of Origin:China (Mainland)

Flat Face T45 89mm Button Drill Bit for Top Hammer Rock Drill with Spherical Buttons KSQ threaded drill bits include general, retrac and reaming three series, with stronger button-fixing ability, longer service life, better wear-resistance and ...

Brand Name:MIROC

Model Number:SD8, M80, QL80, DHD380 ETC.

Place of Origin:ShanDong China(Mainland)

.... Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH drilling a nearly constant penetration rate regardless of hole length. DTH bits are paired with their corresponding hammers (by drilling hole diameter and

Brand Name:Teamwhole

Model Number:13" Numa 120 Shank DTH bit SD12 , DHD112 , NUMA120 , NUMA125

Place of Origin:Changsha,Hunan,China

...Drilling 1.General Introduction Bit Face Shape Selection: 1. Drop Center Bit ----For high penetration rates in soft to medium hard and fissured rock formations. 2. Concave Face ----The all-around application bit face specifically for medium hard and homogeneous rock formations. Good hole deviation control and good flushing capacity. 3. Convex Face...

Brand Name:sollroc

Model Number:DHD360

Place of Origin:China

...Face DTH Hammer Drilling Tools Product Description: MISSION60 provides world-class DTH Drilling Tools for water well drilling, diamond coring, and other underground drilling applications. Our DTH Drilling Tools are available in multiple thread sizes, including R22, R25, R28, R32, R38, T38, T45, T51, ST58, and ST68. We also offer a wide variety of bit face options, such as flat face, convex face, concave face...

Brand Name:ROSCHEN

Model Number:T51- 89mm 102mm 115mm 127mm

Place of Origin:CHINA

T51 102 mm Retrac Spherical Button Flat Face and Drop Center Button Bits for Rock Drilling T51 89 mm Retrac Spherical Button Flat Face and Drop Center Button Bits Model: R22, R25, R28, R32, R35, R38, T38, T45, T51, T60, ST58/ST68 Product Description: ...

Categories:DTH Drill Bits

Country/Region:china

We are capable to design and manufacture according to customer's requirement on the Bit DiaNo., Air holes, carbide button shape and the bit face shape. High air pressure and low air pressure. Thanks to our long year experienced technicians and engineers...

Brand Name:Super Diamond

Place of Origin:China

...Drill Bit , High Effective Rock Hammer Drill Bits T38 Product name thread button bits rock button bits Material Alloy steel and tungsten carbide Color depend on customers' requirement Thread R25,R28,R32,R38,T38,T45,T51,T60,ST68 Diameter 34mm-127mm Button bit shape Ballistic and Spherical Face...

Brand Name:Glorytek

Model Number:165mm

Place of Origin:China

...Facing Tungsten Carbide Buttons Mine Bit 165mm Drilling Rig Tools for High Air Pressure DTH Hammer Description: Our DTH hammer and bits are compatible with CIR, DHD, QL,SD,Mission, etc. series of Atlas and Sandvik etc. They are with high efficiency, low failure rate and long service life. They are with high efficiency, low failure rate and long service life, which can realize efficient and economical drilling...

Brand Name:MING

Model Number:Bit 110-110P

Place of Origin:CHINA

... rock drilling tools manufacturer has a full range of DTH drill bits with CIR shanks and Russian bayonet type for a wide range of hole sizes, which are designed to match all conceivable applications for water well industries, ...

Place of Origin:China

Brand Name:Jinquan

Model Number:DHD340A, DHD350R, DHD360, DHD380; Cop32, Cop34, Cop44, Cop54, Cop64, Cop84; Mission 40, Mission 50 , Mission 60, Mission80; SD4, SD5, SD6, SD8; TD40, QL50, QL60, QL80; BR2, BR3.

... and low air pressure DTH drill bits are both available. Our DTH button hammer bits are made from the best tungsten carbide tips & special steels, after hot heat treated, the steels reach a good level in surface compression & ...

Brand Name:MTH

Model Number:115mm

Place of Origin:CHINA

... breakage, high penetration rates and high productivity. There are mainly four types of end face design forms used by down-the-hole drill bits: namely, end face convex type, end face plane type, end face concave type and end face deep concave center type.

Place of Origin:Zhejiang, China

Brand Name:Sanrock

.... Low to medium air pressures. Maximum hole deviation control. 2. Concave Face The all-round application bit face specifically for medium hard and homogenerous rock formations. Good hole deviation control and good flushing capacity. 3. Convex Face For

Brand Name:OEM

Place of Origin:CHINA

...Drilling Bits DTH Bit for Low Pressure DTH Hammers 1. Size range of low pressure DTH rock bit: 68mm-253mm 2. DTH rock bit face shapes: Flat, Concave, Convex 3. DTH bit button shapes: Spherical, Ballistic, Parabolic 4. Application of DTH rock bit: They are widely used for mine, quarry, road construction for the drilling and blasting work, water well drilling, slope protection, anchoring, etc. 5. Bit...

Brand Name:LIAN XIANG

Place of Origin:ChengDu China

... drill bit, signle drill bit, DTH hammer, PDC drill bit, HDD drilling tool bits of mining and rock drilling machine, button bits for drag bits, tricone drill bits, etc. Button Bit Shape Concave face, Convex face, Double gauge face, Flat face Advantage 1.

Brand Name:JCDRILLS

Model Number:115mm

Place of Origin:Hebei,China

...Drill Bit , ISO CE Tungsten Carbide Material Mining Drill Bit Characteristics 1. high and low air pressure down-the-hole drill bits 2. Low air pressure hole Dia.:65-220mm 3. High air pressure hole Dia.:85-305mm 4. Face type:drop center/concave/convex/double gauge/flat 5. Our DTH Bit can be suitable for Original Atlas Copco /Sandivk big brands' DTH Hammers...