e40 lampholders go not go gauge

Brand Name:Sinuo

Model Number:SN993

Place of Origin:China

... Go” gauges are manufactured according to relative requirements of IEC 60061-3, they are required by UL 496 2013 clause 5.2.4.2. These lampholder gauges are used to check whether the dimensions and shapes of the lampholders meet standard requirements by

Brand Name:Kingpo

Model Number:7006-26-4

Place of Origin:china

E40 Lamp cap gauge | Not go gauges for screw threads of lampholders E40 | 7006-26-4 Purpose: to check the maximum minor diameter of the screw thread, dimesion D1, of lampholder E40. Testing: the screw thread of the lampholder shall be assumed to be correct if the gauge does not enter by its own weight so far that the thread protrudes beyond surgace T. IEC60061-3 E40 Lampholder gauges Model Gauge Description 7006-25-7 Go gauges...

Brand Name:SHC

Model Number:SC-E40H1

Place of Origin:China

Gauge For Lampholders E40 E14 High Pressure Gauge For Lampholders List: 7006-25-7 “GO” GAUGE FOR SCREW THREADS OF LAMPHOLDERS E10, E14 AND E40 7006-26-4 “NOT GO” GAUGES FOR SCREW THREADS OF LAMPHOLDERS E10,EP10,EY10,E14,E27,E39 AND E40 7006-30-2 PLUG GAUGE FOR E14 LAMPHOLDER FOR TESTING CONTACT-MARKING 7006-30A-1 E14 PLUG GAUGE FOR LAMPHOLDERS E14 WITH CANDLE SHAPED SHAFT FOR CANDLE LAMPS FOR TESTING CONACT-MARKING 7006-31-5 E14 GAUGE...

Brand Name:PEGO

Model Number:E40

Place of Origin:China

...-3) Purpose: To check: a. Protection against bulb-neck damage by the rim of the E40 lampholder. b. Contact-making in E40 lampholders with respect to lamps having dimensions adverse to contact-making. Testing: a. When the gauge is screwed fully home with a

Brand Name:KingPo

Place of Origin:China

..., IEC60399 Model Number Gauge Name 7006-25-7 “GO” GAUGE FOR SCREW THREADS OF LAMPHOLDERS E10, E14 AND E40 7006-26-4 “NOT GO” GAUGES FOR SCREW THREADS OF LAMPHOLDERS E10,EP10,EY10,E14,E27,E39 AND E40 7006-30-2 PLUG GAUGE FOR E14 LAMPHOLDER FOR

Brand Name:JLX

Model Number:7006-25-7

Place of Origin:Made in China

...E40 Go Gauges for Screw Threads of Lampholders The drawing is intended only to illustrate the essential dimensions of the gauge. For details of screw thread of lampholders E10, E14 and E40, see sheets 7004-22, 7004-23 and 7004-24 respectively. The sharp part of the edge of the threed at the underside of the gauge for checking lampholders...