fig 9 2 test finger probe

Place of Origin:China

Brand Name:HongCe

Model Number:HT-U04

... to hazardous moving parts such as access to fan blades through a fan finger guard. The handle is made of nylon while the finger is made of stainless steel. The end of the handle is with threaded hole which can be equipped with the dynamometer.

Brand Name:kingpo

Place of Origin:china

Model Number:SM206

... probe is made of stainless steel. Standard:UL1278 Fig 10.1. Application:The heating element and any part of the element assembly (such as an element support, sheath and similar parts) shall be so guarded that flammable material as well as persons will be

Brand Name:PEGO

Model Number:PG-TPA

Place of Origin:China

... probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with the back of the hand. Specification: Diameter of test sphere: 50mm Diameter of baffle: 50mm Thickness of

Brand Name:KingPo

Place of Origin:China

... 10.2 and UL1278 chapter 10 Guarding of Heating Elements Product details: It conforms to standard requirement of UL1278 Fig 10.2. The handle is made of nylon and the probe is made of stainless steel. Application: The heating element and any part of the

Brand Name:kerang

Model Number:HT-U11

Place of Origin:CHINA

Test Probe HT-U11 Standard:UL499 Fig 6.4 and UL982-2006 Fig 58.5(PA190). Application:It is used for the protection test of portable electrode-type heating appliances. Test sample:Portable electrode-type heating appliances intended for household use. ...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts.The Rigid Test Finger was made on stainless steel and Polyamide handle. Applicatiopn 1.The joint part of The Standard Test

Brand Name:JLX

Model Number:LX-02T50

Place of Origin:Made in China

... of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. The Jointed Test Finger was made on stainless steel and Polyamide handle. Material: Stainless Steel. Handle: Polyamide. Finish:

Place of Origin:China

Brand Name:BONAD

Model Number:BND-19

...Test Finger 19 IEC61032 Children Test Finger 19 Article NO.:BND-19 Specification: Children Test Finger / Children Test Finger19 1, According to : IEC61032-1997 Fig12 and Fig.13 / EN71 ASTM F963 and UL 2, Children Test Finger 19 Probe is the necessary appliance to prevent electric shock for household and similar electrical problem Technical Parameters: 1, Knurled Finger Diameter: 5.6mm 2, Knurled Finger...

Brand Name:SHC

Model Number:SC-FABCD

Place of Origin:China

...Test Fingers IEC60529 IP1X IP2X IP3X IP4X test probes IEC60335 Product information: These probes conforms to IEC60529 for IP1X IP2X IP3X IP4X Specification and technical parameters: I) IP1X Test sphere probe SC-F1A-F It conforms to the standard requirements of IEC61032 fig.1, IEC60529 IP1 and IEC60065. This probe is intended to verify protection the back of hand of persons against access to hazardous parts. It is also the necessary probe...