hammers dth drill bits

Brand Name:MIROC

Model Number:RC Hammer Bits

Place of Origin:Shangdong,China

...Hammer DTH Drill Bits / RE545 Hammer Bits In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH drilling a nearly constant penetration rate regardless of hole length. DTH bits are paired with their corresponding hammers (by drilling...

Brand Name:SOLLROC

Model Number:sd6

Place of Origin:China

...wide range of rocks types. In conjunction with DTH hammers, drill hammer bits are designed with a splined drive for rotating the bit in the ground.Our Bits are used for Construction, Water well drilling, Geothermal Drilling, Micropiles, Quarry and Mining

Brand Name:JCDRILL

Model Number:All Models

Place of Origin:China (Mainland)

...durability and wear characteristics. Specific heat treatment standards and special “stress relief” processes ensure consistent performance. DTH hammer bits are designed for maximum performance and hole cleaning ability and high penetration rate. We can

Brand Name:Super Diamond

Model Number:DHD340

Place of Origin:China

DTH Drill Bits 4 1/2”(115mm) For Down The Hole Hammer DHD340, Flat face, Guage8*14mm, center8*13mm Description 1. Rapid drilling speed, bit body wearless; 2. Advanced heat treatment process, ensure the drilling life longer than similar products in the ...

Brand Name:MING

Model Number:MH P110

Place of Origin:CHINA

...DTH hammer for blasting Product category: Blasting drilling tools Matched hammer: Hammer P110 Connection thread: Bayonet Impact power: 2.8 Working pressure(bar): 0.5 Outer diameter: 98 Weight(KGS): 24.3 Bit diameter recommend(mm): 110~140 Bayonet P110 connection DTH hammer...

Categories:DTH Drill Bits

Country/Region:china

...carbide button shape and the bit face shape. High air pressure and low air pressure. Thanks to our long year experienced technicians and engineers in the field for more than ...

Brand Name:MTH

Model Number:190mm diameter

Place of Origin:CHINA

...DTH Hammer Gold Color Mining Drill Bits DTH Drill Bit Specification: Bit size Shank type Recommended DTH bit diameter 3.5''/3'' DTH Hammer bits COP34, DHD3.5, MISSION30, BR3 shank 90mm to 105mm 4'' DTH Hammer bits DHD340, QL40, MISSION40, SD4 shank 110mm to 130mm 5'' DTH Hammer bits DHD350, QL50, MISSION50, SD5 shank 134mm tio 152mm 6'' DTH Hammer bits...

Brand Name:MIRCO

Model Number:CIR90 DTH hammer bit

Place of Origin:China

... air and transmitting an intensive percussion energy to the bit to enable the drilling by crushing the rock. Drilling method by DTH hammer exerts high drilling performance especially for drilling hard rock and contributes for shortening work schedule.

Brand Name:New Diamond

Model Number:COP36

Place of Origin:Hunan, China (Mainland)

...DTH Drill Bits For Water Well Drilling , DTH Hammer Bits Heat Insulation Description Hunan New Diamond offers top quality DTH hammers and bits which have been tested in the hardest rock formation. Our bits use quality hardened steel alloy for the bit body and premium quality tungsten carbide buttons. With superb performance and long life span. Our bits...

Brand Name:ROSCHEN

Model Number:6", 8", 10"

Place of Origin:Germany, China

...DTH Drill Bits Surface Drill Rig For Surface Top Hammer Rock Drilling Roschen Down The Hole Hammer quality can be replaced of by Boart Longyear, atlas copco basis on the quality grade, and in the after sales service. DTH bits, Down The Hole drilling bit, DTH button bits DTH bits, Down The Hole drilling bit, DTH button bits manufacturer and supplier, produced by Roschen Group Limited, these DTH hammer bits...

Brand Name:OED/OEM

Model Number:3 inch 4 inch 5 inches 6 inches

Place of Origin:China

DTH Button Bit 5 Inches 35° DTH Tools for Mining Quarry for Shank cop54 MS50 BR51 DHD350 QL50 SD5 DTH Hammers And Button Bits DTH Hammers Are Used For High Air Pressure Mining Dth Hammerblast Hole Drilling And Water Well Drilling Project. Working With DTH Drilling Pipe And DTH Drill Bit, Mainly Applied In Mining, Marble Quarry Or Well Drilling...

Brand Name:QIDELI

Model Number:CIR70-76

Place of Origin:PUTIAN FUJIAN CHINA

... submersible percussion device. The CIR76 hammer and CIR76-76 bits have lower air consumption,It's a very energy saving product. We usually using it on the architectural egineering and open case mining engineering. CIR70(CIR76) Hammer parameter: Length of

Brand Name:ENG

Model Number:4141

Place of Origin:China

DTH Hammer DTH Button Drilling Bit Down-the-hole (DTH) hammer bits are used with Down-the-hole hammers for drilling holes through a wide range of rocks types. In conjunction with DTH hammers, drill hammer bits are designed with a splined drive for rotating the bit in the ground. Drill bits are available in different sizes and different styles so they can drill a wide range of hole sizes. Our variety of Down the Hole (DTH) bits...

Place of Origin:China

Brand Name:Jinquan

Model Number:Threaded & Tapered

...; DTH button bit shank style: DHD3.5, DHD340, DHD350, DHD360, DHD380, COP34,COP44,COP54,COP64,COP84, SD4, SD5, SD6, ...

Brand Name:SUVEC

Model Number:DTH Hammer Bits

Place of Origin:China

...DTH Hammer Bits Low Air Pressure CIR80 CIR90 90mm DTH Drill Bit In Down the hole drilling, the DTH hammer bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH drilling...

Place of Origin:Zhejiang, China

Brand Name:Sanrock

... Down The Hole Hammer Dth Drill Hammer Carbon Steel Dhd360 Cop64 Ql60 Sd6 Mission60 DTH hammer type HD65 HSD6 HQL6 HD85 Length(less bit) mm 1248 1261 1212 1492 Weight(less bit) kg 100 100 95 188 External diameter mm Φ142 Φ142 Φ146 Φ180 Bit shank COP64 ...