iec 60811 508 high temperature indentation device

Brand Name:Sinuo

Model Number:SN2141A

Place of Origin:China

... Technical Parameters: Item Parameters Model SN2141A Standard IEC 60811-508 Figure 1, IEC 60811-3-1 Figure 1 and etc. Weights 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000g, each of 3 pieces, totally are 30 pieces Station 3 stations ...

Brand Name:HongCe

Model Number:HDX1310

Place of Origin:China

... tests — Pressure test at high temperature for insulation and sheaths, IEC 60811-3-1 figure1. Application: For PVC insulated and sheathed wire and cable products, measure resistance to thermal deformation of PVC insulated and sheathed under the ...

Brand Name:JLX

Model Number:LX-88I1

Place of Origin:Made in China

Product details: Conforming to many standard requirements, this testing apparatus is used to test the heat resistance of the insulation material. It has a rectangular blade (see figure 41a) with an edge 0,7 mm wide, to be used in the case of round pins, or...

Brand Name:AI

Model Number:AIC-6050

Place of Origin:CHINA

...1997 Sect 8.1~8.3 ● IEC 60811-508 gives the procedure for a pressure test at high temperature, which typically applies to thermoplastic compounds used for insulating and sheathing materials Technical specifications 1 Thickness of knife edge two groups 2

Brand Name:Sinuo

Model Number:SN889-225L

Place of Origin:China

... No.5 (IEC 60811-508), etc. Product Overview 1. The drying oven must be good grounded to ensure safe. 2. The drying oven should be placed in a room with good ventilation conditions and no ...

Brand Name:PEGO GROUP

Model Number:PG-IDD

Place of Origin:China

...Indentation Device for Testing Cable Insulation Sheaths 1. Introduction The indentation device is designed according to IEC60811-508:2012 figure 1, the device is consisted by blade, supporting mandrel and loads.It is applied to test the indentation produced by the insulation sheath of the plug or cable under high temperature and pressure, the device...