ignitability test

Brand Name:AI

Model Number:AIC-8191

Place of Origin:CHINA

... furniture conduct test methods and evaluation. This section applies to public places with mattresses, sofas and other upholstered furniture resistance to ignition test and evaluation, furniture Soft package resistance to ignition. Standard: ISO 8191-1~2

Brand Name:YUYANG

Model Number:YYF050

Place of Origin:China

...Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.Hot-wire coil ignition test...

Brand Name:Sinuo

Model Number:SNM05

Place of Origin:China

... and restrictions: Medical device boards or devices in oxygen-rich environments 3. Application: It is used for spark ignition test of medical device boards or devices in oxygen-rich environment, and is used to evaluate the fire risk of its equipment under

Brand Name:PEGO GROUP

Model Number:HW-1

Place of Origin:China

... Hot Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating ...

Brand Name:KingPo

Place of Origin:China

IEC 60335-2-17 Spark Ignition Test Apparatus | Compliant with Standard Certification Product Overview: Professional Flame Retardancy Testing for Electric Blankets This spark ignition test apparatus strictly complies with IEC 60335-2-17 Clause 30.101 ...

Brand Name:HOOHA

Model Number:FTech-FTPC 8

Place of Origin:DONGGUAN

... is an analog cigarettes and matches as flame ignition source for resistance to ignition of upholstered furniture conduct test methods and evaluation This section applies to public places with mattresses, sofas and other upholstered furniture resistance to

Brand Name:DAXIAN

Model Number:DX8369

Place of Origin:China

...Ignitability Test Single Flame Source Flammability Testing Equipment Description: Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test...

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

...Ignitability Test Apparatus In the construction and building materials industry, ensuring the fire safety of structures is of paramount importance. The EN ISO 11925-2 Building Material Ignitability Test Apparatus plays a crucial role in evaluating the ignition...

Brand Name:HOOHA

Place of Origin:Guangdong

Software Furniture Flammability Test Apparatus , PLC Automatic Anti Ignition Testing Machine Scope of application: The fire ignition source of the simulated match is evaluated against the ignition characteristics of the software furniture. Meet the ...

Brand Name:VOUCH

Model Number:5114

Place of Origin:CHINA

... test, combustibility test of electronic industry, home electronic appliance and materials. The glow wire apparatus and common test procedure is to simulate the effect of thermal stressed witch may be produced by heat sources such as glowing elements or

Brand Name:Hust Tony Instruments

Model Number:HTB-007

Place of Origin:China

...Ignitability Test Apparatus-- Single-Flame Source Test Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test...

Place of Origin:China

Brand Name:HongCe

Model Number:HC-1

...IEC60947.1, IEC730.1. It is suitable for Arcing resistance test of electric and electronic products, household appliances and its materials. The working principle is to simulate the electric leakage on the insulator which may cause among different polar of

Brand Name:SKYLINE

Model Number:SL-FL089

Place of Origin:China

... ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame (length ...

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

...Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-annealed at a defined power (0.26W/mm) and duration (8-12 seconds). The wire is wound in five full turns around the sample at a 6mm pitch, then tested at the same power (0.26W/mm) until ignition

Place of Origin:China

Brand Name:CHENGFENG

...Ignition Characteristics Testing Machine Overview: This device uses smoldering cigarettes and simulated match flames as ignition sources to conduct anti ignition tests on soft furniture, simulating the anti ignition performance of soft furniture under the impact of match flames and cigarette head flames in actual use, in order to determine the anti ignition performance of soft furniture. The test

Brand Name:HJ

Model Number:HWI-1

Place of Origin:China

...Testing Equipment Hot wire ignition tester With Electrical control Standard: IEC60950-1 Information technology equipment – Safety – Part 1: General requirements Annex A.4 Hot wire ignition test; IEC60947-1 Low-voltage switchgear and controlgear –Part 1: General rules Annex M M.1 Hot wire ignition test (HWI); IEC60695-2-20 Fire hazard testing — Part 2: Glowing/Hot wire based test...

Brand Name:Sinuo

Model Number:SN778

Place of Origin:China

...Ignition Coil Test Method Apparatus Complied Standards & Clauses IEC60695-2-20 “Fire hazard testing - Part 2: Glowing/Hot wire based test methods - Section 20: Hot-wire coil ignitability test on materials” Equipment Overview Application: Suitable for fire hazard tests...

Brand Name:GOLD

Model Number:GD-ISO11925

Place of Origin:China

... flammability test - test time There are 2 ignition times to choose from, 15s or 30s. The test start time is the start time of ignition. If the ignition time is 15s, the total test time is 20s, calculated from the start of ignition. If the ignition time is

Brand Name:KINGPO

Place of Origin:Mainland China

... of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors. The

Brand Name:YUYANG

Model Number:YYW36

Place of Origin:China

... ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame (length ...