ignitability tester

Brand Name:HongCe

Model Number:HAI-1

Place of Origin:China

High Current Arc Ignition Tester HAI-1 Products Introduction This device conforms to standard requirements of UL 746A, UL746C, UL 498 clause 114, IEC 60950-1, BS EN 60950-1, BS 7002, etc. It is suitable for arcing resistance test of the materials of ...

Model Number:SIT

Place of Origin:China

...Ignitability Tester uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame. SIT ISO11925 Ignitability Tester is applicable to building material categories of B, C,

Model Number:FGW

...ignition tester,safety test equipment Model FGW: Glow wire ignition tester,safety test equipment Glow wire ignition tester,safety test equipment is designed to test the resistance to fire of insulating parts. It assesses the susceptibility of electrical insulating materials to ignition as a result of exposure to a glowing wire.This test method determines the minimum temperature required to ignite...

Brand Name:KINGPO

Place of Origin:Mainland China

... of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors. The

Brand Name:HJ

Model Number:HAI-1

Place of Origin:China

High Current Arc Ignition Tester Arc Ignition Speed ​​40 Times/Minute Flammability Testing Equipment Product Introduction HAI-1 High Current Arc Ignition Tester is a professional Flammability Testing Equipment created by the original manufacturer. It ...

Brand Name:AI

Model Number:DFI

Place of Origin:China Mainland

...Ignitability Tester is designed according to the BS476-12:1991. Method of test for ignitability of products by direct flame impingement.The accuracy of the Ignitability tester meets the requirements of relevant standards and meets the control requirements for the accuracy of measurement. Standards: BS 476-12:Fire tests on building materials and structures - Part 12: Method of test for ignitability...

Brand Name:YUYANG

Model Number:YYF050

Place of Origin:China

...Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.Hot-wire coil ignition...

Brand Name:SKYLINE

Model Number:SL-FL081

Place of Origin:China

Automatic Ignitability / Flammability Tester for Building Materials Application: Building Materials Ignitability Tester, to determine the ignitability of building products subjected to direct impingement of vertical single-flame source in the principle of ...

Place of Origin:China

Brand Name:KeRang

... test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time. Test sample:Information technology ...

Brand Name:KingPo

Model Number:KP-601A

Place of Origin:China

IEC 60601-1 Spark Ignition Tester to check the RISK of fire in an OXYGEN RICH ENVIRONMENT for ME EQUIPMENT & ME SYSTEMS 1.According to standard: IEC 60601-1-Figure 34-figure37(clause ...

Brand Name:Shengtai instrument

Model Number:SH106BR

Place of Origin:CHINA

The SH106BR Automatic Open Flash Point and Flash Point Tester is designed and manufactured in accordance with the requirements specified in the People's Republic of China standard GB/T 3536ASTMD92 "Petroleum Products - Determination of Flash Point and ...

Brand Name:YUYANG

Model Number:YYF062

Place of Origin:China

Blanket Flammability Testing Equipment with Freely Set Ignition Time Products: Blanket Flammability Tester is designed and developed based on ASTM D4151; Suitable for bedding, including bed sheets, blankets, mattress mattress, pillow, duvet, and similar ...

Brand Name:Automatic Ignition Coil Auto Electrical Tester

Model Number:Automatic Ignition Coil Auto Electrical Tester

Place of Origin:China

...Ignition Coil Tester Auto Electrical Tester Description: Fast, simple and accurate way of to determine the defects in the ignition coils. Automatic distinguishes different ignition coil type by auto switching control modes. Adjustable Frequency control ranging from 120Hz ~ 12 KHz. Safe and fallproof. Ignition Coil Tester...

Brand Name:HOOHA

Place of Origin:China

... to characterize the product by measuring ease of ignition (time), rate of smoke generation (mass loss) and toxicity (gas analysis). These are essential parameters in the evaluation of the potential fire hazard of ...

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

...Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-annealed at a defined power (0.26W/mm) and duration (8-12 seconds). The wire is wound in five full turns around the sample at a 6mm pitch, then tested at the same power (0.26W/mm) until ignition

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

... Tester for Single Flame Source Test emerges as a crucial tool. This advanced piece of equipment is designed to meticulously assess the ignitability and flammability characteristics of building materials, providing essential data for architects,

Brand Name:DAXIAN

Model Number:DX8038

Place of Origin:China

... of upholstered furniture conduct test methods and evaluationThis section applies to public places with mattresses, sofas and other upholstered furniture resistance to ignition test and evaluation, furniture Soft package resistance to ignition. Test to

Brand Name:ZL

Model Number:ZL-5049

Place of Origin:China

...Ignition Mask Flame Retardant Performance Tester Testing standards: YY0469-2011 medical surgical mask The flame retardant performance tester of medical surgical masks produced by our company is used for the flame retardant performance testers of surgical masks. Meet the test standard YY0469-2011 medical surgical masks. Equipment Features: 1. Automatic ignition...

Brand Name:TESTEX

Model Number:TF310

Place of Origin:China

...Igniter 45 Degree Flammability Tester for Fabric Flammability Test 35 kg Application 45 Degree Flammability Tester: This tester is used finding out the material flammability (fabric burning test) under controlled conditions. The automatic igniter is provided to make sure the 45-degree fabric flammability tester...

Brand Name:HAIDA

Model Number:HD-W821-2

Place of Origin:Guangdong, China (Mainland)

...Tester For Face Mask Holder 45° Angle Ignition Time 0-99.0s Application Flammability Tester is mainly composed of a control system and a combustion chamber. The sample is installed on a sample holder inclined at a 45° angle in the combustion chamber, and the burner is close to the sample. The sample is ignited...