plastics quality evaluation melt index tester

Brand Name:JHH

Place of Origin:Beijing, China

Model Number:XNR-400C

21.6kg Melt Flow Index Tester with 0.1°C Temperature Resolution for Plastics Quality Evaluation *, *::before, *::after {box-sizing: border-box; } * {margin: 0; } html, body {height: 100%; } body {line-height: 1.5; -webkit-font-smoothing: antialiased; } img...

Brand Name:Lixian

Model Number:HZ-1706

Place of Origin:China

...ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Melt Index Tester To meet the

Brand Name:LIYI

Place of Origin:Guangdong, China

New Design Extrusion Plastometer Non-woven Melt-Blown Fabric Use Indexer Electronic Product Description Melt index Tester conform to the requirements of the standard of GB/T3682-2000. The main parameters of Melt index instrument also conform to the ...

Brand Name:GC

Model Number:GC-MI-EP

Place of Origin:China

...gums pass through a certain temperature and load in a viscous flow state. It is suitble for melting high temperature polycarbonate, polysulfoxide, fluorine plastics, nylon and other engineering plastics. Also, it is appropriate for the polyformaldehyde,

Brand Name:Kejian Kinsgeo

Model Number:KJ-3092B

Place of Origin:Dongguan China

...Melt Flow Index Machine , Electronic Melt Flow Index Tester with One Year Warranty Introduction: Melt Index Tester meets the standards GB/ T3682-2000, the main parameters of Melt Index Tester also meet the standard requirements of ISO1133-97, ASTM1238, JIS, ect.. It is used in polyethylene, polypropylene, polystyrene, ABS, polyethylene amide, fiber resin, acrylic, POM, fluorine plastic, polycarbonate, and other plastic

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R803-1

...Melt Flow Index Tester , Automatic Plastic Testing Equipment Product Description Melt Flow Index tester is used to determine melt-mass flow rate (MFR).melt-Volume flow rate (MVR) and melt density of thermoplastic resin.it is applicable not only to the higher melting temperature, such as polycarbonate, nylon, Fluoroplastics, poly oxide and other engineering plastics, and it also applies to plastic measurement of melt...

Brand Name:YUYANG

Model Number:YY166

Place of Origin:China

... 2000,ASTM D1238. It's suitable to measure melt flow character of PP, PE, POM, ABS plastics and plastic productions, widely used in factories, products quality testing station, scientific and research institutes, and concerned industries. Specification:

Brand Name:LIYI

Place of Origin:China

Model Number:LY-RR

..., polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Characteristics: 1. Fast heating speed, very small overshoot. 2.

Brand Name:Great Win

Model Number:GW-108

Place of Origin:China

...Melt Flow Index Tester Machine For Mask Melt Blown Materials Volume Testing Method(GW-108) Product introduction: It is used to measure the temperature and load of various plastics and resins in the state of viscous flow, and the melt flow rate MFR value of the standard die every 10 minutes. It is suitable for polycarbonate, polyarylsulfone, and fluorine with a high melting temperature. Engineering plastics such as plastics

Brand Name:BAXIT

Model Number:GLO-MF46

Place of Origin:CHINA

Melt flow Rate Meter / Plastic Melt Meter / Plastic Particle Melt Index Tester Product Description Equipment Overview 1. The heating cylinder is made of Hastelloy to avoid oxidizing and rusting at the high temperature (up to 400-500 ℃) for a long ...

Brand Name:ZL

Model Number:ZL-3013

Place of Origin:China

...Melt Flow Rate Index Test Equipment Plastic Industry Melting Point Tester Download Brief: ZL-3013 Melt flow rate meter.pdf Equipment Overview: Plastic MFI Melt Flow Index Test Equipment is used to determine the melt flow rate of thermoplastics (MFR; units: g/10min) instrument. For polyethylene, polypropylene, polyoxymethylene, ABS resin, polycarbonate, nylon, plastics and other polymers fluoride melt...

Brand Name:Haida

Model Number:HD-R911

Place of Origin:China

Proof Tracking Index Tester Description: Proof Tracking Index Tester is a destructive test of insulating materials to simulate the above situation. It is used to test and evaluate the relative resistance to leakage and tracking of insulators under the ...

Brand Name:DAXIAN

Model Number:DX8427

Place of Origin:China

IEC60587 Evaluation Of Electrical Insulating Materials, Tracking Testing Machine Manufacturer Technical Description: The mechanism of electrical impingement on the epoxy resin insulating material using a high voltage of 3.5 kV AC with a frequency of 50 Hz ...

Brand Name:AI

Model Number:AIC41098

Place of Origin:China

...Melting index apparatus/melt flow rate tester (touch screen) is used for determination of the melt mass-flow rate (MFR)/melt volume-flow rate (MVR) for thermoplastics like polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic...

Brand Name:AISRY

Model Number:ASR-5605

Place of Origin:China

High Quality Application Determination Of Melt Flow Rat Testing Machine Application: It can be used for the determination of melt flow rate and melt density of various plastics such as polyethylene,polypropylene,polystyrene,ABS resin,fiber resin,...

Brand Name:BonninTech

Model Number:XNR-400B/D

Place of Origin:Wuhan, China

...melt flow rate properties of thermoplastic (such as PE, PP, POM, ABS, PC, nylon and Fluor plastics, etc) under high temperature, according to test methods of GB/T3682, ISO1133, ASTM D1238 test standard. It is widely supplied to the production ...

Brand Name:SKYLINE

Model Number:SL-PI08

Place of Origin:China

.... The melt flow indexer is suitable for measuring melt mass flow rate(MFR) and melt volume flow rate(MVR) of plastic materials such as polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylic, POM, fluorine plastic, polycarbonate.

Brand Name:POOTAB

Model Number:PT-8036H

Place of Origin:China

... of aromatic sulfone, fluorine plastic, nylon and other engineering plastics, can also be applied to polyethylene (PE),(PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in

Brand Name:Shengtai instrument

Model Number:ST007BP

Place of Origin:CHINA

... tester is a special instrument for the determination of gluten content and gluten quality (gluten index) in flour. Gluten index is used to evaluate the strength of gluten. This instrument is suitable for the determination of wheat flour and whole wheat

Brand Name:TUNSING

Model Number:DS8507

Place of Origin:China

...Quality Double Sided Tpu Hot Melt Adhesive Film For Textile Product:DS8507 Despription: This product is a thermoplastic film hot melt adhesive with the release paper, can be repeatedly heated and plasticized for bonding.This kind of hot melt adhesive has excellent excellent for textiles, TPU and PVC.It has the characteristics of low melt flow index...