safety valve test

Brand Name:haozheng

Place of Origin:CHINA

...test Bench Safety Valve test Bench Control Valve test Bench Total power 75KW,90KW,110KW,132KW,160KW,315kw,350kw Range of test pressure 0~42MPa Range of flow rate 0~500L/min Range of rotational speed 0~3000r/min Composition Dynamic system, hydraulic control system, hydraulic oil filter temperature control system and electric control system, data acquisition test...

Brand Name:Sempell

Model Number:Mini­S Safety Relief Valve

Place of Origin:China

... MiniS Safety Relief Valve Design For Steam Gases And Liquids Spring-operated Safety Valves Spring-operated safety valve with flanges and threats for low pressure• Type-tested for use with steam, gases and liquids (TÜV-SV-11-972)• Type-tested acc. to...

Brand Name:ZZ TOP OIL TOOLS

Model Number:BOP Safety Valve

Place of Origin:China

...Testing BOP Safety Valve / Fail Safe Safety Valve SSV- Super Safety Valve The Super Safety Valve is a Fail Safe Safety Valve for testing from a land or jack-up rig. It is normally run inside or below the Blow Out Preventer (BOP) and is used to control well flow. Its ID is 3.0 in., OD is 8.0 in., and its working pressure is 15,000 psi. This valve has a port for chemical injection downhole or to control a subsurface safety valve...

Brand Name:Techcore

Model Number:617.20500

Place of Origin:CHINA

...Testing Super Safety Valve High Pressure DST Working String The Super Safety Valve is the BOP safety valve applied for testing operations from jack-up or land rigs. It can rapidly closes the test string in an emergency, serves as a fail safe safety Valve for well testing. And during the well testing, the Super Safety valve is featured with capablity to cut the wireline and 1.5-inch coiled tubing, if the super safety valve...

Brand Name:Techcore

Model Number:Super Safety Valve

Place of Origin:China

...Testing Tools Super Safety Valve For Drill Stem Testing​ The Super Safety Valve is a Fail Safe Safety Valve for testing from a land or jack-up rig. It is normally run inside or below the Blow Out Preventer (BOP) and is used to control well flow. Its ID is 3.0 in., OD is 8.0 in., and its working pressure is 15,000 psi. This valve has a port for chemical injection downhole or to control a subsurface safety valve...

Brand Name:HIGHLAND

Model Number:YST450

Place of Origin:China Dezhou

...Valve Testing Machine has been designed with a flow rate of 450 L/min, pressure of 42 Mpa, compact structure, and complete detection data. This model, YST450, is a reliable piece of hydraulic valve testing equipment, with a hydraulic valve test bench that provides the highest accuracy and safety for your valve testing needs. It is suitable for testing valves...

Brand Name:CD-CNLN

Place of Origin:China

...Safety Valve SS314/SS316 Stainless Steel Material Product Description Valve Type:safety valve Connection Type: screw/thread Nominal Diameter: Customize Nominal Pressure: Customize Material: Valve Body:SS316/SS304 Valve Disc:06Cr19Ni10+PCTFE; Valve Seat:05Cr19Ni10; Seal material:PTFE; Suitable Medium:O2,N2,Ar,LNG,LCO2,etc Suitable Temparature:(-80℃~+120℃) Design and Manufacture:Conform to GB/T24925-2010 Testing...

Brand Name:CCSC

Model Number:2 1/16", 3 1/16", 4 1/16", 5 1/8"

Place of Origin:China

... for testing oil and gas well with high flow rates, high pressures, or the pressure of H2S. The surface safety valve (SSV) is used to quickly shut down the well choke manifold upstream in the event of overpressure, failure, a leak in downstream equipment,

Brand Name:CCSC

Model Number:Size: 1 13/16" thru 7 1/16" Working Pressure:2,000psi to 15,000psi.

Place of Origin:China

...Safety Valve - SSV Hydraulic Surface Safety Valve - SSV is designed to quick closure due to a pipe leak or burst, equipment malfunction, fire, or similar emergency.The Surface safety valve (ssv) is normally closed,pressure needs to be applied to the actuator to compress the spring and open the valve. The pressure needed to keep the valve...

Place of Origin:Hubei, China

Brand Name:CHUANCHU

Model Number:HT_AQFJC_1

...the tank design code Dimensions 800mm0*800mm0*950mm Safety valve testing bench mainly apply to normal pressure tank truck , to test the performance of safety valve opening positive pressure . It consists of bench body / digital pressure gauge / cylinder /

Brand Name:SDA

Model Number:3DY-600/40

Place of Origin:China

..., pressure regulating valve,and relief valve! (1).The dynamic end (attached picture by the following)componented by the pulley, crankshaft, connecting bar , etc. dynamic power produced by the belt and driving ...

Brand Name:DONJOY

Model Number:NO.VAQ100Q1

Place of Origin:CHINA

...: Product Name: 1"-4"Pneumatic Welded Quick-Release Safety Valve Safety Over Flow Valve Stainless Steel for Diary Food Valve Body Material: SS304 or SS316L Seal Material: EPDM,NBR,FPM Max.Working Pressure: 8Bar 116PSI Max. ...

Place of Origin:China

Brand Name:Super Safety Valve

Model Number:5"

... Valve body OD: 8.0" Handing subOD: 8.16" The Super Safety valve (SSV) is a master valve used for testing operations from jack-up or land rigs. The SSV is installed in the test string so that a BOP ram can be closed on the ram lock sub located in the top

Brand Name:TECLION

Model Number:DFV200

Place of Origin:China,Anhui

... and notify TECLION Company of the receipt status. Debugging personnel need to undergo professional training and have read this manual. During the test drive process, relevant safety regulations and rules should be strictly followed. In principle, when the

Brand Name:JGPV

Place of Origin:China

...safety valve Product introduction: Safety valve, as the best device for extra-pressure protection, will automatically open and fully discharge to protect the equipment pressure from going on rise when medium’s pressure rises over the allowed valve and will automatically close when the pressure lowers to setting valve. This safety valve...

Brand Name:DEYE

Model Number:SV-25-4X6

Place of Origin:CHINA

C95800 Bronze Safety Valve For Sea Water Model NO.: SV-25-4X6 PN25 bronze pressure regulation relief safety valves Quick Details Design Standard: API 526 / ASME Section VIII Inspection & Testing Standard: API 527 Dimensions: API 520 / 521 End Connection: ...

Brand Name:ATO

Place of Origin:CHINA

...well flow. So during the downhole operation, the BOP safety valve is the fail safe safety valve. Design Features of 15K Super Safety Valve The BOP safety valve includes a new ball mechanism that has a 3.0 inch ID and the capability to cut coiled tubing as

Brand Name:VCTSY

Model Number:TSV-2 7/8-5, TSV-3 1/2 -5.7, TSV-4 1/2 -7.125, TH-5 1/2 -8.375, TSV-7 -8.35

Place of Origin:China

... environment. When installed, the safety valve is connected to the surface through the control line. The pressure from surface acts upon the piston of the safety valve to control the opening and closing of the safety valve. Features Open and Closure of

Brand Name:AI LE SEN

Model Number:HDP1100-1

Place of Origin:China

...Valve Test Device Can Test MAN-MK98 Fuel Valve Product Brief This type of test rig is equipment for MAN Diesel Slide Fuel Valves. Can The atomizing test One unit test all fuel-injection valves aboard The unit powered by air, and delivers a maximum hydraulic pressure of 1100bar Analogue gauge, readings class 1.0 The following test control procedures can be performed : Opening pressure Venting function Leak Test O-ring seal Test...

Brand Name:Sindara steel

Model Number:Safety Valve

Place of Origin:China

...pressure from exceeding a predetermined safety value. Once the pressure returns to normal, the valve automatically closes, preventing further flow of the medium. Technical Parameters Nominal Pressure: DN50, DN100, etc. Connection Type: Flange, Threaded,