toggle clamp for checking fixture

Brand Name:Jointech

Model Number:GH-12132

Place of Origin:China

...Toggle Clamp Uses For Checking Fixture GH-12132 Manual Quick Release Vertical Hold Down Toggle Clamp Destaco GH-12132 Features: Quick release, small holding capacity Application: Welding, machining, checking fixture, assembly fixture, woodholding, metal holding, workholding clamps...

Brand Name:SKYLINE

Place of Origin:CHINA

... the bottle at a 45° angle to the spindle and clamp the nipple or the end of the drinking unit 10 ± 2 mm. Apply 60±5N at a speed of 200±5mm/min in the direction of 45° with the nipple spindle for 10 sec. Check if the nipple or drinking part is broken.

Brand Name:NTH

Model Number:2F SERIES

Place of Origin:CHINA

Product Details Brand:NTH To prevent deformation of workpiece for gripping the end surface, suitable for thin workpiece. The compensating mechanism of gripping that can clamp irregular surface workpieces. It can go with the check device to inspect the ...

Brand Name:Infinity Machine

Model Number:RS-8008H

Place of Origin:Made in China

...clamping the headphone, fasten one end of earphone, headband clamping on support rod, the other end of earphone fix on the fixture of the digital tensile gauge, control the screw ball move right, the digital tensile gauge will show the tensile data (can reserve the max. tensile), by this way to check the ...

Brand Name:HTXG

Model Number:SHT200-2/4(A)

Place of Origin:ZHEJIANG, CHINA

... is installed on the welding frame. Do not arbitrarily adjust the toggle switch of the milling cutter Check the parts/materials to be welded to ensure that they are accurately clamped on the frame , to ensure the welding quality of electric welding. When

Brand Name:SUNTECHMACH

Model Number:SHT200-2/4(A)

Place of Origin:ZHEJIANG, CHINA

... is installed on the welding frame. Do not arbitrarily adjust the toggle switch of the milling cutter Check the parts/materials to be welded to ensure that they are accurately clamped on the frame , to ensure the welding quality of electric welding. When

Brand Name:HongCe

Model Number:HH9943

Place of Origin:China

...Figure 19, etc. Test Scope: Mainly used for checking the forces necessary to retain or remove covers, cover-plates or parts of them. Parameters: 1.Driver forcing method:Manual 2. the test fixture: clamping range of 100mm; 3. Sheet of hard material: (1 ± 0

Brand Name:OEM

Place of Origin:China

... 150, 200, 250 or 300 mm. The distances between clamping options and the T-slots can be according to custom specification to suit customer requirements. Application precision layout, assembly, checking tables, large fixture or machine bases, set-up plates,