2.0 MM Thickness 6 Layer PCB LED Display Screen Black Solder Mask

6 Layer PCB Display Screen Used Black Solder Mask

Printed Circuit Board Features:

1 6 Layer printed circuit board used in display screen.

2 FR4 substrate material, tg 150 degree and board thickness is 2.0mm.

3 Black solder mask and white silkscreen.

4 OSP Treatment

5 PCB size is 748mm*90.4mm/1pcs.

6 35 um copper thcikness on each layer.

7 PCB file or gerber file should be offered by customer.

8 Customized printed circuit board.

Packing Specifications:

1 One vacuum pcb package should not be over 25 panels based on panel size.

2 The vacuum pcb package sealed must be free to tear, hole or any defects that may cause leakage.

3 The pcb package must be suitable to ensure effective vacuum sealing.

4 Every package must have desiccant and humidity indicator card on the inside of vacuum package.

5 Humidity indicator card target less than 10%.

FAQ:

Q1:What is PCB Grid Testing or Bed of Nails Testing?

A1: Grid testing or Bed of Nails testing is a process used to check the performance of components mounted on a PCB board. This test uses a frame/fixture that contains various pins inserted into an epoxy phenolic glass cloth laminated sheet (G-10) in order to access all the PCB test points. These pins act as sensors which are aligned to make contact with the test points on the PCB board and are also connected with a measuring unit through wires. The position of the pins is designed and customized for each PCB based on the components or points on the board that need to be tested.

A grid testing machine has three building blocks - a fixture, a bed of nails and software, to control the overall functionality of the machine. It usually has two cameras which are placed on the top and bottom of the machine in order to scan the whole board.

Advantages of PCB Grid Testing:

• Very Reliable method of PCB testing as all the points on the PCB board can be tested simultaneously.
• Offers very good accuracy since it uses two cameras
• Can easily detect manufacturing defects
• An in-circuit tester is easy to program
• Interpretation of test results is quite easy
• It checks for Open, shorts, mission components, Wrong polarity, defective components, and current leakages in the circuit
• Most of the parameters can be checked without applying power to the PCB under test

Limitations of PCB Grid Testing:

• Fixtures used in bed of nails testing are expensive since they are mechanical and require a different wiring assembly for a different PCB board
• Fixtures are mechanical so any change in the number of pins or their position require extra cost
• This test doesn’t test continuity through connectors so there are the chances that the connectors’ faults may remain unnoticed.
• Faults related to solder joints, excess solder, solder quality, and solder void also remain unidentified

This type of testing is called In-Circuit Testing. Another test process used for In-Circuit testing is Flying Probe Testing.

Witgain Technology Limited was established in 2007. Factories locate in HuiZhou City and marketing locates in ShenZhen City. The total area of two factories is around 10000 square meters. We can offer 2-layer and multi-layer pcb services to our customers, highest to 24 layers and rigid-flex pcb, ceramic pcb, HDI pcb, heavy copper pcb are also included. To meet our customer's diversified demands, we also accept prototype orders, small batch orders and big batch orders. Quality and technology is what we value most and we will never stop improving our capabilities. Our customers' satisfaction is always what we are seeking for.